Soft Magnetic Properties of High Bs Fe-N-Al-O Films Prepared by Sputtering.

Authors:
  • SIS. Ikeda
    S. Ikeda
  • NTN. Takeguchi
    N. Takeguchi
  • MKM. Kakehi
    M. Kakehi
  • ITI. Tagawa
    I. Tagawa
  • YUY. Uehara
    Y. Uehara

Abstract
Fe-N-Al-O alloy films were fabricated by rf reactive sputtering in a mixed Ar+N2 plasma. The Al and O contents in films were varied by the area ratio of Al2O3 chips placed on an Fe target. We examined the effects of additional elements, such as Al and O, on magnetic and electrical properties of the Fe-N-Al-O films, and we investigated the relationship between soft magnetic properties and microstructure. The permeability reaches maximum, approximately 1800, when the Al-O content range is 10-16 at%. Fe-N-Al-O films in this range have 4πMs = 19-20 kG and ρ = 60-100 μΩcm. The real part of permeability (μ’) of the 0.7-μm-thick Fe79N5Al6O10 film remains constant up to 300 MHz, which can provide a stable frequency response above 100 MHz. For this film, the average grain size of the α phase, estimated by TEM, is about 5 nm. It seems that the addition of Al and O to Fe-N films is effective in suppressing grain growth.

This publication has 11 references indexed in Scilit: