Preparation, characterization and application of a CTAB-modified nanoclay for the adsorption of an herbicide from aqueous solutions: Kinetic and equilibrium studies
Authors:
- Mehdi Shirzad-SiboniMSMehdi Shirzad-Siboni
- Alireza KhataeeAlireza Khataee
- Aydin HassaniAHAydin Hassani
- Semra KaracaSKSemra Karaca
- 13 January 2015
- journal article
- Published by MathDoc/Centre Mersenne in Comptes Rendus. Chimie
- Vol. 18 (2) , 204-214
Abstract
In this study, surfactant-modified pillared montmorillonites (MMT) were prepared using cetyltrimethylammonium bromide (CTAB) by the intercalation method and used as adsorbent to remove bentazon from aqueous solutions. The main compositions of MMT and CTAB/MMT were characterized by Fourier transform–infrared spectroscopy (FT–IR), X-ray diffraction (XRD), scanning electron micrography (SEM) and energy dispersive X-ray (EDX) spectroscopy. The removal efficiency of bentazon was studied as a function of adsorbent dosage, pH, initial bentazon concentration and ionic strength (sodium carbonate, sodium bicarbonate, sodium sulfate and sodium chloride). The removal efficiency of bentazon by CTAB/MMT was more than that of MMT in similar conditions. By increasing adsorbent dosage and initial bentazon concentration, the removal efficiency was increased and declined, respectively. The results showed that the maximum adsorption of organo-modified montmorillonite was obtained at pH 3. The maximum adsorption capacity was estimated to be 500 mg/g at pH 3 and room temperature. The study of the adsorption kinetic model revealed that the pseudo-second order model was the best applicable one to describe the adsorption of bentazon onto CTAB/MMT. Adsorption data were analyzed by both Langmuir and Freundlich adsorption isotherms and the results showed that it was better described by the Langmuir model. The adsorption capacities of the samples were found to increase with Na 2 CO 3 anion saturation, while they decreased in the presence of NaHCO 3 , Na 2 SO 4 and NaCl.Keywords
This publication has 53 references indexed in Scilit:
- Sorption of the herbicide aminocyclopyrachlor by cation‐modified clay mineralsEuropean Journal of Soil Science, 2012
- Adsorption behavior of pesticide methomyl on activated carbon in a high gravity rotating packed bed reactorWater Research, 2012
- Study of the removal of paraquat from aqueous solution by biosorption onto Ayous (Triplochiton schleroxylon) sawdustJournal of Hazardous Materials, 2010
- Application of statistical design of experiment with desirability function for the removal of organophosphorus pesticide from aqueous solution by low-cost materialJournal of Hazardous Materials, 2009
- Preparation and characterization of bimodal mesoporous montmorillonite by using single templateColloids and Surfaces A: Physicochemical and Engineering Aspects, 2009
- The adsorption kinetics and removal of cationic dye, Toluidine Blue O, from aqueous solution with Turkish zeoliteJournal of Hazardous Materials, 2008
- Study of imidaclopride removal from aqueous solution by adsorption onto granular activated carbon using an on-line spectrophotometric analysis systemJournal of Hazardous Materials, 2007
- Sorption and Desorption Behavior of Chloroanilines and Chlorophenols on Montmorillonite and KaoliniteJournal of Environmental Science and Health, Part B, 2006
- Removal of herbicide paraquat from an aqueous solution by adsorption onto spent and treated diatomaceous earthBioresource Technology, 2005
- FTIR techniques in clay mineral studiesVibrational Spectroscopy, 2003