High performance wood composites from highly filled polybenzoxazine
- 18 November 2005
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 99 (3) , 1240-1253
Abstract
Highly filled systems prepared by compression molding of Hevea brasiliensis woodflour filled polybenzoxazine composites with high mechanical properties and reduced water uptake has been developed. The effects of percent filler content and particle size of woodflour on the obtained composite's properties were examined. The low melt viscosity of BA‐a type polybenzoxazine allows substantial amount of woodflour to be easily incorporated into the composites. The results showed that mechanical properties from dynamic mechanical analysis and flexural test at filler content below the optimum filler packing show approximately linear relationship with filler loading. The outstanding compatibility between the woodflour and the polybenzoxazine matrix is evidently seen from the large improvement in the composite's Tg and char yield. Scanning electron micrographs of the composite also reveals substantially strong interface between the woodflour filler and the polybenzoxazine matrix. Water absorption of the composites is greatly reduced with increasing the amount of polybenzoxazine due to the inherent low water absorption of the matrix. The polybenzoxazine is; therefore, a highly attractive candidate as high performance lignocellulosic binder or adhesive and other related applications. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1240–1253, 2006Keywords
This publication has 26 references indexed in Scilit:
- Wood‐flour‐reinforced polyethylene: Viscoelastic behavior and threaded fastenersPolymer Engineering & Science, 2002
- Mechanical properties of wood flake–polyethylene composites. Part I: effects of processing methods and matrix melt flow behaviourComposites Part A: Applied Science and Manufacturing, 2001
- Photoaging and stabilization of rigid PVC/wood‐fiber compositesJournal of Applied Polymer Science, 2001
- Composites reinforced with cellulose based fibresProgress in Polymer Science, 1999
- Thermoplastics Reinforced with Wood Fillers: A Literature ReviewPolymer-Plastics Technology and Engineering, 1998
- Bamboo fiber-reinforced polypropylene composites: A study of the mechanical propertiesJournal of Applied Polymer Science, 1998
- Wood-fiber reinforcement of styrene-maleic anhydride copolymersJournal of Applied Polymer Science, 1998
- Mechanical properties and morphology of impact modified polypropylene-wood flour compositesJournal of Applied Polymer Science, 1998
- Influence of modified wood fibers on the mechanical properties of wood fiber-reinforced polyethyleneJournal of Applied Polymer Science, 1997
- Utilizing straw as a filler in thermoplastic building materialsConstruction and Building Materials, 1996