Analysis of fracturing characteristics of unconfined rock plate under edge-on impact loading
- 11 February 2019
- journal article
- research article
- Published by Taylor & Francis in European Journal of Environmental and Civil Engineering
- Vol. 24 (14) , 2453-2468
Abstract
The objective of this study is to investigate the fracturing characteristics of granite under impact loading. Generation and propagation of cracks from the specimen edge subjected directly to impact loading were captured by the ultrahigh-speed photography. Testing results indicate the existence of a critical impact velocity. At an impact velocity lower than the critical impact velocity, a damage zone will be generated on the edge subjected directly to impact and the damage zone area is varied, depending on the magnitude of impact velocity. At an impact velocity greater than the critical impact velocity, radial cracks appear on the boundary of the damage zone and propagate deep into the rock plate with further increasing impact velocity. The increases in radial crack length and damage zone area are affected by impact velocity and impact angle. However, at some impact velocity, damage zone area decreases while radial crack length increases, demonstrating the existence of an incubation period of crack forming. Comparison between testing and numerical results shows that at a constant impact velocity the fractured zone area and the crater depth are varied, depending on impact angle. The results are helpful to understand the fracturing process in rock subjected to impact loading.Keywords
Funding Information
- National Natural Science Foundation of China (51774107; 51774131)
- Open Program of State Key Laboratory of Explosion Science and Technology (KFJJ17-12M)
- Fundamental Research Funds for the Hefei Key Project Construction Administration (2013CGAZ0771)
- Fundamental Research Funds of the Housing and Construction Department of Anhui Province (2013YF-27)
This publication has 21 references indexed in Scilit:
- Edge on Impact Simulations and ExperimentsProcedia Engineering, 2013
- A study of constitutive relation and dynamic failure for SFRC in compressionConstruction and Building Materials, 2010
- On the dynamic fragmentation of two limestones using edge-on impact testsInternational Journal of Impact Engineering, 2008
- Visualization of Impact Damage in Ceramics Using the Edge‐On Impact TechniqueInternational Journal of Applied Ceramic Technology, 2004
- Formulation and analysis of conserving algorithms for frictionless dynamic contact/impact problemsComputer Methods in Applied Mechanics and Engineering, 1998
- Impact loading of plates and shells by free-flying projectiles: A reviewInternational Journal of Impact Engineering, 1996
- Fracture propagation during impact in three types of ceramicsJournal de Physique IV, 1994
- On a finite element method for dynamic contact/impact problemsInternational Journal for Numerical Methods in Engineering, 1993
- Microcrack-induced damage accumulation in brittle rock under dynamic loadingComputer Methods in Applied Mechanics and Engineering, 1986
- Statistical aspects of the continuous damage theoryInternational Journal of Solids and Structures, 1982