Preparation, microstructure and hydrogen sorption properties of nanoporous carbon aerogels under ambient drying
Authors:
- C E BuckleyC E Buckley
- S MulèSMS Mulè
- M PaskeviciusMPM Paskevicius
- B B DhalBDB B Dhal
- 30 October 2008
- journal article
- Published by IOP Publishing in Nanotechnology
- Vol. 19 (47) , 475605
Abstract
Organic aerogels are prepared by the sol-gel method from polymerization of resorcinol with furfural. These aerogels are further carbonized in nitrogen in order to obtain their corresponding carbon aerogels (CA); a sample which was carbonized at 900 °C was also activated in a carbon dioxide atmosphere at 900 °C. The chemical reaction mechanism and optimum synthesis conditions are investigated by means of Fourier transform infrared spectroscopy and thermoanalyses (thermogravimetric/differential thermal analyses) with a focus on the sol-gel process. The carbon aerogels were investigated with respect to their microstructures, using small angle x-ray scattering (SAXS), transmission electron microscopy (TEM) and nitrogen adsorption measurements at 77 K. SAXS studies showed that micropores with a radius of gyration of <0.35 ± 0.07 to 0.55 ± 0.05 nm were present, and TEM measurements and nitrogen adsorption showed that larger mesopores were also present. Hydrogen storage properties of the CA were also investigated. An activated sample with a Brunauer-Emmett-Teller surface area of 1539 ± 20 m(2) g(-1) displayed a reasonably high hydrogen uptake at 77 K with a maximum hydrogen sorption of 3.6 wt% at 2.5 MPa. These results suggest that CA are promising candidate hydrogen storage materials.Keywords
This publication has 20 references indexed in Scilit:
- Synthesis and characterization of ordered porous carbons with potential applications as hydrogen storage mediaMicroporous and Mesoporous Materials, 2007
- Fabrication and structure of carbon aerogel spheres prepared by inverse suspension/emulsion polymerization and ambient pressure dryingJournal of Applied Polymer Science, 2007
- Toward New Candidates for Hydrogen Storage: High-Surface-Area Carbon AerogelsChemistry of Materials, 2006
- Preparation of low-density carbon aerogels by ambient pressure dryingCarbon, 2004
- An equation of state for deuterium gas to 1000 barMeasurement Science and Technology, 2003
- Analysis of the small-angle intensity scattered by a porous and granular mediumJournal of Applied Crystallography, 2003
- Deposition of Ruthenium Nanoparticles on Carbon Aerogels for High Energy Density Supercapacitor ElectrodesJournal of the Electrochemical Society, 1997
- Gas permeability of carbon aerogelsJournal of Materials Research, 1993
- Organic aerogels from the polycondensation of resorcinol with formaldehydeJournal of Materials Science, 1989
- Thermodynamic properties of hydrogen at pressures up to 1 Mbar and temperatures between 100 and 1000KJournal of Physics C: Solid State Physics, 1986