Interaction of Flame Flashback Mechanisms in Premixed Hydrogen–Air Swirl Flames
- 25 August 2015
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 138 (1) , 011503
Abstract
An experimental study is presented on the interaction of flashback originating from flame propagation in the boundary layer (1), from combustion driven vortex breakdown (2) and from low bulk flow velocity (3). In the investigations, an aerodynamically stabilized swirl burner operated with hydrogen–air mixtures at ambient pressure and with air preheat was employed, which previously had been optimized regarding its aerodynamics and its flashback limit. The focus of the present paper is the detailed characterization of the observed flashback phenomena with simultaneous high speed (HS) particle image velocimetry (PIV)/Mie imaging, delivering the velocity field and the propagation of the flame front in the mid plane, in combination with line-of-sight integrated OH*-chemiluminescence detection revealing the flame envelope and with ionization probes which provide quantitative information on the flame motion near the mixing tube wall during flashback. The results are used to improve the operational safety of the system beyond the previously reached limits. This is achieved by tailoring the radial velocity and fuel profiles near the burner exit. With these measures, the resistance against flashback in the center as well as in the near wall region is becoming high enough to make turbulent flame propagation the prevailing flashback mechanism. Even at stoichiometric and preheated conditions this allows safe operation of the burner down to very low velocities of approximately 1/3 of the typical flow velocities in gas turbine burners. In that range, the high turbulent burning velocity of hydrogen approaches the low bulk flow speed and, finally, the flame begins to propagate upstream once turbulent flame propagation becomes faster than the annular core flow. This leads to the conclusions that finally the ultimate limit for the flashback safety was reached with a configuration, which has a swirl number of approximately 0.45 and delivers NOx emissions near the theoretical limit for infinite mixing quality, and that high fuel reactivity does not necessarily rule out large burners with aerodynamic flame stabilization by swirling flows.Keywords
This publication has 23 references indexed in Scilit:
- Study on the Operational Window of a Swirl Stabilized Syngas Burner Under Atmospheric and High Pressure ConditionsJournal of Engineering for Gas Turbines and Power, 2012
- Experimental Investigation of Turbulent Boundary Layer Flashback Limits for Premixed Hydrogen-Air Flames Confined in DuctsJournal of Engineering for Gas Turbines and Power, 2011
- Optimization of the Aerodynamic Flame Stabilization for Fuel Flexible Gas Turbine Premix BurnersJournal of Engineering for Gas Turbines and Power, 2011
- Dynamic Adaptation of Aerodynamic Flame Stabilization of a Premix Swirl Burner to Fuel Reactivity Using Fuel MomentumJournal of Engineering for Gas Turbines and Power, 2011
- Experiments on Flame Flashback in a Quasi-2D Turbulent Wall Boundary Layer for Premixed Methane-Hydrogen-Air MixturesJournal of Engineering for Gas Turbines and Power, 2010
- Emission Characteristics of a Premixed Cyclic-Periodical-Mixing Combustor Operated With Hydrogen-Natural Gas Fuel MixturesJournal of Engineering for Gas Turbines and Power, 2009
- Burner Development and Operability Issues Associated with Steady Flowing Syngas Fired CombustorsCombustion Science and Technology, 2008
- FLAME PROPAGATION IN SWIRLING FLOWS—EFFECT OF LOCAL EXTINCTION ON THE COMBUSTION INDUCED VORTEX BREAKDOWNCombustion Science and Technology, 2007
- Analysis of Combustion Induced Vortex Breakdown Driven Flame Flashback in a Premix Burner With Cylindrical Mixing ZoneJournal of Engineering for Gas Turbines and Power, 2007
- The flashback of laminar and turbulent burner flames at reduced pressureCombustion and Flame, 1958