Investigation on the Reynolds Number Effect of a Flying Wing Model with Large Sweep Angle and Small Aspect Ratio
Open Access
Abstract
The effect of the Reynolds number on the flying wing common research model with a large sweep angle and small aspect ratio is studied by numerical simulation. The helicity cross-flow transition correction of the Langtry–Menter model is established in view of the deficient prediction accuracies of existing transition prediction models in simulating cross-flow transition, and the helicity parameters are calibrated to improve the prediction accuracy of the numerical method. The transition prediction method is verified by the test results of the standard model transition of the DLR-F5 wing and small-aspect-ratio flying wing. At the same time, the numerical method is effectively verified by comparing it to the aerodynamic/torque results of the standard model of the small-aspect-ratio flying wing. On this basis, the variation laws with the Reynolds number are analyzed for the aerodynamic and flow field characteristics of the flying wing common research model with a large sweep angle and small aspect ratio. The numerical simulation is mainly carried out in the high subsonic speed range (M = 0.9), and the simulated Reynolds number range is from 2 × 106 to 80 × 106, which includes the test Reynolds number and flight Reynolds number. The influence of turbulence on the surface flow pattern and drag characteristics of the small-aspect-ratio standard model is analyzed. Calculation results show that when the turbulence is greater than 0.4%, it has a considerable influence on the surface laminar flow range and total drag coefficient. The results reveal that the Reynolds number mainly affects the magnitude of friction in the cruise state (small angle of attack). The problem of the Reynolds number in the self-aligning region of the flying wing standard model with a small aspect ratio is further studied, and the Reynolds number is found to be greater than 10 × 106. The drag and lift coefficients after the approach are close to the Reynolds number in the self-aligning region of the flying wing standard model with a small aspect ratio.Keywords
Funding Information
- National Natural Science Foundation of China (NNSF) (11372337)
This publication has 20 references indexed in Scilit:
- Modeling Vortex Generating Jet-Induced Transition in Low-Pressure TurbinesJournal of Turbomachinery, 2014
- A modular RANS approach for modelling laminar–turbulent transition in turbomachinery flowsInternational Journal of Heat and Fluid Flow, 2012
- Automatic Transition Prediction for Three-Dimensional Configurations with Focus on Industrial ApplicationJournal of Aircraft, 2011
- Correlation-Based Transition Modeling for Unstructured Parallelized Computational Fluid Dynamics CodesAIAA Journal, 2009
- STABILITY AND TRANSITION OF THREE-DIMENSIONAL BOUNDARY LAYERSAnnual Review of Fluid Mechanics, 2003
- Laminar-turbulent transition prediction in three-dimensional flowsProgress in Aerospace Sciences, 2000
- Two-equation eddy-viscosity turbulence models for engineering applicationsAIAA Journal, 1994
- A New Parameter for Predicting Crossflow Instability.JSME International Journal Series B, 1993
- Some expectation on the mechanism of cross-flow instability in a swept wing flowActa Mechanica, 1987
- Approximate Riemann solvers, parameter vectors, and difference schemesJournal of Computational Physics, 1981