Study on Behavior and Bearing Capacity Computation Method of Shallow Rock-Socketed Short Piles Based on the Self-Balanced Loading Test
Open Access
- 14 March 2022
- journal article
- research article
- Published by Wiley in Computational Intelligence and Neuroscience
- Vol. 2022, 1-11
Abstract
The self-balanced loading test is a state-of-art pile testing method, but its suitability to pile bearing capacity determination in transformer substation engineering in mountainous and hilly areas is not yet clear. In this study, a two-dimensional axisymmetric numerical model is established by the PLAXIS software to simulate the behavior and bearing mechanism of shallow rock-socketed short piles based on the self-balanced loading test. The model is first validated by simulating the field tests of two adjacent piles under self-balanced loading. Then the influence factors of the load-displacement curves of piles are analyzed. Thereafter, the mechanical mechanism of the self-balanced loading tests is simulated and compared with the conventional static loading tests. It is observed that the rock modulus, rock-socketed depth of piles, and burial depth of the Osterberg Cell affect the load-displacement significantly, but the cohesion of the rocks affects little. Moreover, compared with the conventional static loading tests, the shear stress of the pile-soil interface distributes less uniformly under self-balanced loading conditions. On this basis, a bearing capacity computation method of shallow rock-socketed short piles based on the self-balanced loading test is proposed.Keywords
Funding Information
- Scientific Research Project of Anhui Provincial Education Department (KJ2021ZD0066, 51608005, SGAHJYJSXLJS1800417)
- National Natural Science Foundation of China (KJ2021ZD0066, 51608005, SGAHJYJSXLJS1800417)
- State Grid Anhui Electric Power Co., Ltd. Construction Company (KJ2021ZD0066, 51608005, SGAHJYJSXLJS1800417)
This publication has 21 references indexed in Scilit:
- Improved Evaluation of Equivalent Top-Down Load-Displacement Curve from a Bottom-Up Pile Load TestJournal of Geotechnical and Geoenvironmental Engineering, 2011
- Design charts for elastic pile shortening in the equivalent top–down load–settlement curve from a bidirectional load testComputers and Geotechnics, 2011
- Review of methods of analysis of test results from bi-directional static load tests2008
- Axial testing and numerical modeling of square shaft helical piles under compressive and tensile loadingCanadian Geotechnical Journal, 2008
- Equivalent pile load–head settlement curve using a bi-directional pile load testComputers and Geotechnics, 2008
- New Failure Load Criterion for Large Diameter Bored Piles in Weathered GeomaterialsJournal of Geotechnical and Geoenvironmental Engineering, 2001
- Shear Load Transfer Characteristics of Drilled Shafts in Weathered RocksJournal of Geotechnical and Geoenvironmental Engineering, 1999
- O-Cell Testing and FE Analysis of 28-m-Deep Barrette in Manila, PhilippinesJournal of Geotechnical and Geoenvironmental Engineering, 1999
- Skin friction on large-diameter piles socketed into rockCanadian Geotechnical Journal, 1997
- Innovative Load Testing of Deep FoundationsTransportation Research Record: Journal of the Transportation Research Board, 1997