A Test Method for Accelerated Humidity Conditioning and Estimation of Adhesive Bond Durability
- 1 January 1997
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 60 (1-4) , 153-162
Abstract
The ability to determine the durability of adhesive bonds remains an elusive task, especially when the service environment involves exposure to diluents such as water. Moisture continues to be of major concern for many adhesive bond systems for a number of reasons including: 1) many adhesives are hydrophilic, picking up significant amounts of moisture over time; 2) most adhesives and some adherends allow moisture permeation, eventually reaching the adhesive/adherend interface; 3) the high surface energies of metallic and certain other substrates result in moisture migrating to the adherend surfaces and displacing the adhesive from the substrates, and possibly oxidizing the adherend, etc., and 4) absorbed moisture induces swelling stresses which can reduce the bond strength. Recognition of this susceptibility to moisture has led to extensive studies aimed at evaluating the effects of moisture, developing an understanding of the responsible mechanisms, and predicting the performance of adhesive bonds subjected to humid environments. While some studies have focused on the effect of humidity on neat adhesive samples, most studies have recognized the significance of the adhesive/adherend interactions, and have evaluated strength of actual bonded joints. Unfortunately, the time required for typical bonded geometries to reach moisture equilibrium can be quite long. Single lap joints (SLJ) and double cantilever beam (DCB) specimens with a width of 25mm may take several years to equilibrate, depending on the temperature and adhesive. Such lengthy conditioning times hamper the development of improved adhesives, and may delay the acceptance of these adhesives because of the time required to certify them. Methods to accelerate the conditioning of test specimens would be of significant benefit to adhesive formulators and users.Keywords
This publication has 13 references indexed in Scilit:
- Scratch indentation, a simple adhesion test method for thin films on polymeric supportsJournal of Adhesion Science and Technology, 1994
- Thin film cracking and the roles of substrate and interfaceInternational Journal of Solids and Structures, 1992
- Mixed Mode Cracking in Layered Materials1991
- Decohesion of a cut prestressed film on a substrateInternational Journal of Solids and Structures, 1990
- Measurement of adhesion of thin polymer coatings by indentationJournal of Applied Physics, 1989
- A Self-Delamination Method of Measuring the Surface Energy of Adhesion of CoatingsThe Journal of Adhesion, 1988
- Environmental Attack on Adhesive Joints Studied by Cleavage FractureThe Journal of Adhesion, 1988
- Bonding of Aluminium Alloy with some Phenolic Adhesives and a Modified Epoxide Adhesive, and Strength Changes on Exposure to Moist Air at 50°CThe Journal of Adhesion, 1987
- A review of adhesion test methods for thin hard coatingsJournal of Vacuum Science & Technology A, 1986
- A Model for Predicting Joint DurabilityThe Journal of Adhesion, 1980