Detection and Correction of injection failures in diesel engines on the basis of turbocharger instantaneous speed frequency analysis
Open Access
- 1 May 2005
- journal article
- correction
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 219 (5) , 691-701
Abstract
Combustion failure diagnosis techniques for reciprocating internal combustion engines have been developed over the last few years. Nowadays the most usual techniques are based on the crankshaft instantaneous speed or on engine vibrations. These methods, although successfully in use, may be applied only to maintenance tasks or to low and moderate engine speeds. In this paper, a controller for the correction of injection failures is presented. The aim of the algorithm is to ensure that the same quantity of fuel is injected into each one of the cylinders. This governor can be applied to the full operating range of the engine. The injection failure detection and identification technique is based on the measurement of the turbocharger instantaneous speed and its treatment in the frequency domain. The simulation of the controller shows an effective reduction in the dispersion between cylinders to a level below 2 per cent.Keywords
This publication has 15 references indexed in Scilit:
- Exhaust pressure pulsation observation from turbocharger instantaneous speed measurementMeasurement Science and Technology, 2004
- Advanced signal processing for misfire detection in automotive engines2002
- The on-line detection of engine misfire at low speed using multiple feature fusion with fuzzy pattern recognitionProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2002
- Combustion Supervision by Evaluating the Crankshaft Speed and AccelerationSAE International Journal of Advances and Current Practices in Mobility, 2000
- A Time Domain Based Diagnostic System for Misfire Detection in Spark-Ignition Engines by Exhaust-Gas Pressure AnalysisSAE International Journal of Advances and Current Practices in Mobility, 2000
- Determination of engine misfiring using magnetoelastic torque sensorIEEE Transactions on Instrumentation and Measurement, 1998
- Modelling of supercharger turbines in internal-combustion enginesInternational Journal of Mechanical Sciences, 1996
- The Use of Speed Sensing for Monitoring the Condition of Military Vehicle EnginesProceedings of the Institution of Mechanical Engineers, Part D: Transport Engineering, 1986
- The Diagnosis of Cylinder Power Faults in Diesel Engines by Flywheel Speed MeasurementProceedings of the Institution of Mechanical Engineers, Part D: Transport Engineering, 1986
- Systems of conservation lawsCommunications on Pure and Applied Mathematics, 1960