Comparison of the Linear Finite Element Prediction of Deformation and Strain of Human Cancellous Bone to 3D Digital Volume Correlation Measurements
Authors:
- 21 July 2005
- journal article
- research article
- Published by ASME International in Journal of Biomechanical Engineering
- Vol. 128 (1) , 1-6
Abstract
The mechanical properties of cancellous bone and the biological response of the tissue to mechanical loading are related to deformation and strain in the trabeculae during function. Due to the small size of trabeculae, their motion is difficult to measure. To avoid the need to measure trabecular motions during loading the finite element method has been used to estimate trabecular level mechanical deformation. This analytical approach has been empirically successful in that the analytical models are solvable and their results correlate with the macroscopically measured stiffness and strength of bones. The present work is a direct comparison of finite element predictions to measurements of the deformation and strain at near trabecular level. Using the method of digital volume correlation, we measured the deformation and calculated the strain at a resolution approaching the trabecular level for cancellous bone specimens loaded in uniaxial compression. Smoothed results from linearly elastic finite element models of the same mechanical tests were correlated to the empirical three-dimensional (3D) deformation in the direction of loading with a coefficient of determination as high as 97% and a slope of the prediction near one. However, real deformations in the directions perpendicular to the loading direction were not as well predicted by the analytical models. Our results show, that the finite element modeling of the internal deformation and strain in cancellous bone can be accurate in one direction but that this does not ensure accuracy for all deformations and strains.Keywords
This publication has 31 references indexed in Scilit:
- Finite element models predict in vitro vertebral body compressive strength better than quantitative computed tomographyBone, 2003
- Quantitative Computed Tomography-Based Finite Element Models of the Human Lumbar Vertebral Body: Effect of Element Size on Stiffness, Damage, and Fracture Strength PredictionsJournal of Biomechanical Engineering, 2003
- Digital Volume Correlation Including Rotational Degrees of Freedom during MinimizationExperimental Mechanics, 2002
- Femoral structure and stiffness in patients with femoral neck fractureJournal of Orthopaedic Research, 2000
- Digital volume correlation: Three-dimensional strain mapping using X-ray tomographyExperimental Mechanics, 1999
- Computed tomography‐based finite element analysis predicts failure loads and fracture patterns for vertebral sectionsJournal of Orthopaedic Research, 1998
- Load Sharing Between the Shell and Centrum in the Lumbar Vertebral BodySpine, 1997
- Texture correlation: A method for the measurement of detailed strain distributions within trabecular boneJournal of Orthopaedic Research, 1995
- Characterization of in vivo strain in the rat tibia during external application of a four-point bending loadJournal of Biomechanics, 1992
- Compressive axial strain distributions in cancellous bone specimensJournal of Biomechanics, 1989