Shear Failure Mechanism and Shear Zone Morphology of Red-Bed Soft Rock at Different Strain Rates

Authors:
Open Access
Publisher website
Google Scholar
Abstract
Red-bed soft rock is widely distributed in the upper Yellow River. To investigate the strain-rate effect of saturated red-bed soft rock, a series of triaxial tests was conducted on argillaceous siltstone. Specifically, fifteen samples were tested by controlling confining pressures (5 MPa, 10 MPa, 15 MPa, 20 MPa, and 25 MPa) and strain rates (6.0%/min, 0.6%/min, and 0.06%/min) via triaxial tests, scanning electron microscopy (SEM), X-ray diffraction (XRD), Computed Tomography (CT), and 3D laser scanner. The results show that the peak strength of argillaceous siltstone increases with the rise in strain rate, being highly sensitive to the variation in strain rate under low confining pressure while relatively insensitive under high confining pressure. The tangent modulus of argillaceous siltstone is significantly affected by strain rate, and the influence of strain rate on tangent modulus weakens with the increase in confining pressure. Strain rate exerts an influence on the fracture mode and the shear zone roughness of soft rock. That is, with the increase in strain rate, the roughness increases, and the fracture mode transforms from pure shear fracture to tension–shear coupled fracture. With the increase in confining pressure, the number of shear cracks increases, and the shear surfaces tend to distribute approximately in parallel. The research results provide a scientific reference for the reservoir site selection of pumped storage power station in the upper Yellow River.
Funding Information
  • National Natural Science Foundation of China (42572350)
  • Fundamental Research Funds for the Central Universities, CHD (300102264201)
  • The Youth Innovation Team of Shaanxi Universities—Green Ecology-Empowered Urban Disaster Resilience Innovation Team

This publication has 37 references indexed in Scilit: