Effect of UV curing time on physical and electrical properties and reliability of low dielectric constant materials
Authors:
- 1 November 2014
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 32 (6)
Abstract
This study comprehensively investigates the effect of ultraviolet (UV) curing time on the physical, electrical, and reliability characteristics of porous low-k materials. Following UV irradiation for various periods, the depth profiles of the chemical composition in the low-k dielectrics were homogeneous. Initially, the UV curing process preferentially removed porogen-related CHx groups and then modified Si-CH3 and cage Si-O bonds to form network Si-O bonds. The lowest dielectric constant (k value) was thus obtained at a UV curing time of 300 s. Additionally, UV irradiation made porogen-based low-k materials hydrophobic and to an extent that increased with UV curing time. With a short curing time (300 s) was associated with improved mechanical strength, electrical performance, and reliability of the low-k materials, but none of these increased linearly with UV curing time. Therefore, UV curing is necessary, but the process time must be optimized for porous low-k materials on back-end of line integration in 45 nm or below technology nodes.Keywords
This publication has 30 references indexed in Scilit:
- UV irradiation effects on the bonding structure and electrical properties of ultra low-k SiOC(–H) thin films for 45 nm technology nodeCurrent Applied Physics, 2011
- Porous pSiCOH Ultralow-k Dielectrics for Chip Interconnects Prepared by PECVDAnnual Review of Materials Research, 2009
- Ultralow dielectric constant pSiCOH films prepared with tetramethylcyclotetrasiloxane as skeleton precursorJournal of Applied Physics, 2008
- Thermal furnace and Ultraviolet assisted curing impact on SiOCH spin-on ultra low dielectric constant materialsThin Solid Films, 2008
- A robust k∼2.3 SiCOH low-k film formed by porogen removal with UV-cureMicroelectronic Engineering, 2007
- Comparison Between E-beam and Ultraviolet Curing to Perform Porous a-SiOC:HJournal of the Electrochemical Society, 2007
- Effect of moisture adsorption on the properties of porous-silica ultralow-k filmsMicroelectronic Engineering, 2006
- Short-ranged structural rearrangement and enhancement of mechanical properties of organosilicate glasses induced by ultraviolet radiationJournal of Applied Physics, 2006
- Low dielectric constant materials for microelectronicsJournal of Applied Physics, 2003
- Heat and Moisture Resistance of Siloxane-Based Low-Dielectric-Constant MaterialsJournal of the Electrochemical Society, 2001