Silicon microdischarge devices having inverted pyramidal cathodes: Fabrication and performance of arrays
Authors:
- 22 January 2001
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 78 (4) , 419-421
Abstract
Microdischarge devices having inverted, square pyramidal cathodes as small as at the base and 35 μm in depth, have been fabricated in silicon and operated at gas pressures up to 1200 Torr. For the polyimide dielectric incorporated into these devices the discharges produced exhibit high differential resistance in Ne), ignition voltages for a single device of ∼260–290 V, and currents typically in the μA range. Arrays as large as have been fabricated. For an 8 μm thick polyimide dielectric layer, operating voltages as low as 200 V for a array have been measured for 700 Torr of Ne. Array lifetimes are presently limited to several hours by the thin (1200–2000 Å) Ni anode.
Keywords
This publication has 4 references indexed in Scilit:
- Flexible microdischarge arrays: Metal/polymer devicesApplied Physics Letters, 2000
- Parallel operation of microhollow cathode dischargesIEEE Transactions on Plasma Science, 1999
- Planar microdischarge arraysElectronics Letters, 1998
- Microdischarge devices fabricated in siliconApplied Physics Letters, 1997