Determination of Forming Limit Diagrams Based on Ductile Damage Models and Necking Criteria
Open Access
- 1 October 2017
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 14 (10) , 1872-1892
Abstract
In this paper, forming limit diagrams (FLDs) for an aluminum alloy are predicted through numerical simulations using various localized necking criteria. A comparative study is conducted for the FLDs determined by using the Lemaitre damage approach and those obtained with the modified Gurson-Tvergaard-Needleman (GTN) damage model. To this end, both damage models coupled with elasto-plasticity and accounting for plastic anisotropy have been implemented into the ABAQUS/Explicit software, through the user-defined subroutine VUMAT, within the framework of large plastic strains and a fully three-dimensional formulation. The resulting constitutive frameworks are then combined with four localized necking criteria to predict the limit strains for an AA6016-T4 aluminum alloy. Three of these necking criteria are based on finite element (FE) simulations of the Nakazima deep drawing test with various specimen geometries, while the fourth criterion is based on bifurcation theory. The simulation results reveal that the limit strains predicted by local criteria, which are based on FE simulations of the Nakazima test, are in good agreement with the experiments for a number of strain paths, while those obtained with the bifurcation analysis provide an upper bound to the experimental FLD.Keywords
This publication has 36 references indexed in Scilit:
- Forming limit criterion for ductile anisotropic sheets as a material property and its deformation path insensitivity, Part II: Boundary value problemsInternational Journal of Plasticity, 2014
- Investigation and comparative analysis of plastic instability criteria: application to forming limit diagramsThe International Journal of Advanced Manufacturing Technology, 2014
- Introduction to Ductile Fracture Modelling2013
- Strain localization analysis using a large deformation anisotropic elastic–plastic model coupled with damageInternational Journal of Plasticity, 2009
- An anisotropic ductile damage model based on irreversible thermodynamicsInternational Journal of Plasticity, 2003
- Modeling of crack growth in round bars and plane strain specimensInternational Journal of Solids and Structures, 2001
- Thermodynamically Founded CDM Models for Creep and Other Conditions1999
- On the numerical integration of a class of pressure‐dependent plasticity modelsInternational Journal for Numerical Methods in Engineering, 1987
- Void Nucleation Effects in Biaxially Stretched SheetsJournal of Engineering Materials and Technology, 1980
- Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile MediaJournal of Engineering Materials and Technology, 1977