Architected 3D-Printed Electrodes with NiFe-LDH Coatings for Alkaline Oxygen Evolution
Open Access
- 6 October 2026
- journal article
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 4 (10) , 6017-6026
Abstract
Alkaline water electrolysis requires electrodes that combine high oxygen evolution reaction (OER) activity with manufacturability. In this work, we fabricate OER-architected titanium electrodes via selective laser sintering and functionalize them with Ni- and NiFe-layered double hydroxides (LDHs). We observe that without a Ni seed layer, NiFe-LDH grows only weakly on the Ti architecture. This is evidenced by comparing the Ti architecture, the Ti architecture coated with Ni (Ti@Ni), the Ti architecture coated with LDH (Ti@LDH), and the full-layer assembly of the Ti architecture coated with Ni, followed by LDH growth (Ti@Ni/LDH). Morphological and chemical characterization using SEM−EDX, XRD, XPS, and STEM confirms the presence of a NiFe-LDH coating throughout the complex metallic architecture. Electrochemical double-layer capacitance indicates that functionalization modifies the electrochemical surface area, increasing from 57.23 cm2 for the Ti@Ni/LDH architecture to 69.90 cm2 for the Ti@Ni architecture. Although the electrochemical surface area varies slightly between architectures, the electrochemical overpotential remains the lowest for the Ti@Ni/LDH architecture, ca. 362 mV. Furthermore, the architectures influence reaction kinetics, with Tafel slopes decreasing from 203 mV dec−1 for the bare Ti electrode to 119 mV dec−1 with Ti@Ni and then improving with LDH deposition to 47 mV dec−1. The results demonstrate that the composition of 3D metal electrodes influences NiFe-LDH growth and, in turn, electrochemical surface area, overpotential, and interfacial charge transport. The results are expected to establish additively manufactured metallic-coated substrates as a viable platform for water-electrolysis electrodes in OER.Keywords
This publication has 55 references indexed in Scilit:
- In Situ Regulating Cobalt/Iron Oxide‐Oxyhydroxide Exchange by Dynamic Iron Incorporation for Robust Oxygen Evolution at Large Current DensityAdvanced Materials, 2023
- Bifunctional Water Splitting Performance of NiFe LDH Improved by Pd2+ DopingChemElectroChem, 2023
- 3D Printed Mechanically Robust Graphene/CNT Electrodes for Highly Efficient Overall Water SplittingAdvanced Materials, 2020
- Fe‐Doped Nickel Hydroxide/Nickel Oxyhydroxide Function as an Efficient Catalyst for the Oxygen Evolution ReactionChemElectroChem, 2019
- Significance of interface barrier at electrode of hematite hydroelectric cell for generating ecopower by water splittingInternational Journal of Energy Research, 2019
- Metallization of 3D Printed Polymers and Their Application as a Fully Functional Water‐Splitting SystemAdvanced Science, 2019
- Sub‐3 nm Ultrafine Monolayer Layered Double Hydroxide Nanosheets for Electrochemical Water OxidationAdvanced Energy Materials, 2018
- Three‐Dimensional Smart Catalyst Electrode for Oxygen Evolution ReactionAdvanced Energy Materials, 2015
- Effect of phosphorus concentration on the electronic structure of nanocrystalline electrodeposited Ni–P alloys: an XPS and XAES investigationSurface and Interface Analysis, 2008
- ChemInform Abstract: Formation and Anion Exchange Reactions of Layered Transition Metal Hydroxides (Ni1-xMx)(OH)2(CO3)x/2(H2O)z (M: Fe, Co).ChemInform, 1987