The effect of impulses on precipitation behavior in 7075-T6 aluminum alloy joint by Impulse Friction Stir Welding
Authors:
- Keqi WangKWKeqi Wang
- Anton NaumovANAnton Naumov
- Marina GushchinaMGMarina Gushchina
- Fedor IsupovFIFedor Isupov
- Ahmad Alali AlkhalafAAAhmad Alali Alkhalaf
- Oleg PanchenkoOPOleg Panchenko
Preprint
- 13 March 2023
- preprint
- Published by Springer Nature in Research Square
Abstract
Joining procedure for aluminum alloy 7075–T6 (AlZnMgCu1.5) sheets was realized by Impulse Friction Stir Welding (IFSW) with different impulse frequencies. The additional mechanical impulses during IFSW enhance the forging action of the tool, resulting in the weld microstructure modification. The microstructural evolution in different zones of the weld was studied, focusing on the strengthening precipitation behavior of the welded joint as well as the overall mechanical properties. The results illustrate that the application of impulses during IFSW accelerates the reprecipitation and dynamic recrystallization processes, which lead to the formation of strengthening precipitates and the homogeneous grain microstructure, respectively, in the SZ. HAZ of the welds obtained by the FSW and IFSW represent dislocation free grains interior. The precipitation content in the HAZ of the welds obtained by conventional FSW and IFSW is completely different. The HAZ of the weld obtained by conventional FSW represent high concentration of stable η phase. Conversely, high concentrations of heat sensitive phase - η' precipitates - were found in the HAZ microstructure of the joints obtained by IFSW.Keywords
All Related Versions
This publication has 38 references indexed in Scilit:
- Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloyActa Materialia, 2014
- Microstructure and mechanical properties of friction stir welded 6082 AA in as welded and post weld heat treated conditionsMaterials & Design (1980-2015), 2013
- Effects of welding speed on the microstructure and hardness in friction stir welding joints of 6005A-T6 aluminum alloyMaterials & Design (1980-2015), 2013
- Improvement of weld temperature distribution and mechanical properties of 7050 aluminum alloy butt joints by submerged friction stir weldingMaterials & Design (1980-2015), 2011
- Effects of thermal boundary conditions in friction stir welded AA7050-T7 sheetsMaterials Science and Engineering: A, 2010
- Effect of initial butt surface on tensile properties and fracture behavior of friction stir welded Al–Zn–Mg–Cu alloyMaterials Science and Engineering: A, 2008
- A sub-structural analysis of friction stir welded joints in an AA6056 Al-alloy in T4 and T6 temper conditionsMaterials Science and Engineering: A, 2007
- Friction stir welding parameters: a tool for controlling abnormal grain growth during subsequent heat treatmentMaterials Science and Engineering: A, 2005
- Characterization of a friction-stir-welded aluminum alloy 6013Metallurgical and Materials Transactions B, 2002
- A process model for friction stir welding of age hardening aluminum alloysMetallurgical and Materials Transactions A, 2001