A 12V-to-PoL CCC-Based Easy-Scalable Multiple-Phase Hybrid Converter with Auto VCF Balancing and Inactive CF Charging
Authors:
- 21 April 2024
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Abstract
In datacenter, a single-stage conversion from 12-V VIN to point-of-load PoL is favorable. Hybrid converters with 2:1 pre-stage switch-capacitor (SC), such as Double-Step-Down (DSD) [1] and flying capacitor $\mathrm{C}_{\mathrm{F}}$ -Cross-Connected (CCC) [2], have higher power density and efficiency than the conventional buck. Additionally, these hybrid converters fits the 12V-to-PoL applications better than those works with more complex SC networks. Meanwhile, to conduct a large load current $I_{\text{LOAD}}$ , a multiple-phase MP converter may be mandatory. $\text{In}$ this work, we propose CCC-based MP hybrid converter, evolving from the 2-phase (2P) CCC as shown in Fig. 1. The $2\mathrm{P}$ CCC has two CFS (CFA, CFB), two inductors $L_{\mathrm{A}}, {L}_{\mathrm{B}}$ , two $V_{\text{IN}}$ -stress switches $M_{\mathrm{A} 2}, M_{\mathrm{B} 2}$ , four $V_{\text{IN}} / 2$ -stress switches $M_{\mathrm{A} 1}, M_{\mathrm{A} 4}, M_{\mathrm{B} 1}, M_{\mathrm{B} 4}$ . We split the ${V}_{\text{IN}}$ -stress switches into two $V_{\text{IN}}/2$ -stress, e.g. $M_{\mathrm{A}2}$ becomes $M_{\mathrm{A}2}$ ‘ and ${M}_{\mathrm{A}3(\prime)}$ . The nodes between the split switches VOCA, VOCB are DC nodes $=V_{\text{IN}}/2$ . Then, we connect the DC nodes as VDc, and now the $2\mathrm{P}$ converter has two symmetric sub-converters. Fig. 1 shows that with the same total power switch area, the simulated power conversion efficiency PCE is almost the same before and after the $M_{2}$ split. This decouples the two phases of the original CCC, and we can extend the number of phases $N$ ., Meanwhile, it inherits most CCC's benefits, such as higher efficiency and power density than the MP buck, and fast transient response than DSD [2]. Its sub-converter shares a similar topology to [3], but removes DC capacitor.
Keywords
This publication has 2 references indexed in Scilit:
- A 12-to-1 Flying Capacitor Cross-Connected Buck Converter With Inserted D > 0.5 Control for Fast Transient ResponseIEEE Journal of Solid-State Circuits, 2023
- 17.2 A Masterless Fault-Tolerant Hybrid Dickson Converter with 95.3% Peak Efficiency 20V-to-60V Input and 3.3V Output for 48V Multi-Phase Automotive Applications2021