Study of the Dynamic Recrystallization Process of the Inconel625 Alloy at a High Strain Rate
Open Access
Abstract
High-temperature compression and electron backscatter diffraction (EBSD) techniques were used in a systematic investigation of the dynamic recrystallization (DRX) behavior and texture evolution of the Inconel625 alloy. The true stress–true strain curves and the constitutive equation of Inconel625 were obtained at temperatures ranging from 900 to 1200 °C and strain rates of 10, 1, 0.1, and 0.01 s−1. The adiabatic heating effect was observed during the hot compression process. At a high strain rate, as the temperature increased, the grains initially refined and then grew, and the proportion of high-angle grain boundaries increased. The volume fraction of the dynamic recrystallization increased. Most of the grains were randomly distributed and the proportion of recrystallized texture components first increased and then decreased. Complete dynamic recrystallization occurred at 1100 °C, where the recrystallized volume fraction and the random distribution ratios of grains reached a maximum. This study indicated that the dynamic recrystallization mechanism of the Inconel625 alloy at a high strain rate included continuous dynamic recrystallization with subgrain merging and rotation, and discontinuous dynamic recrystallization with bulging grain boundary induced by twinning. The latter mechanism was less dominant.Keywords
Funding Information
- National Natural Science Foundation of China (No.51665032)
- Science Foundation for Distinguished Young Scholars of Gansu (18JR3RA134)
This publication has 32 references indexed in Scilit:
- Microstructural evolution of a nickel-based superalloy during hot deformationMaterials & Design (1980-2015), 2015
- New constitutive model for high-temperature deformation behavior of inconel 718 superalloyMaterials & Design (1980-2015), 2015
- Prediction of hot deformation behavior in Ni-based alloy considering the effect of initial microstructureProgress in Natural Science: Materials International, 2015
- Work-hardening behaviors of typical solution-treated and aged Ni-based superalloys during hot deformationJournal of Alloys and Compounds, 2015
- Effect of true strains on processing map for isothermal compression of Ni–20.0Cr–2.5Ti–1.5Nb–1.0Al Ni-base superalloyJournal of Alloys and Compounds, 2014
- Dynamic Recrystallization Behavior of TA15 Titanium Alloy under Isothermal Compression during Hot DeformationAdvances in Materials Science and Engineering, 2014
- Deformation behavior of hot-rolled IN718 superalloy under plane strain compression at elevated temperatureMaterials Science and Engineering: A, 2014
- Multiscale modeling of hot-working with dynamic recrystallization by coupling microstructure evolution and macroscopic mechanical behaviorInternational Journal of Plasticity, 2014
- Hot deformation and processing maps of X-750 nickel-based superalloyMaterials & Design (1980-2015), 2013
- The microstructure and mechanical properties of deposited-IN718 by selective laser meltingJournal of Alloys and Compounds, 2012