Anisotropic Etching of Pyramidal Silica Reliefs with Metal Masks and Hydrofluoric Acid
Authors:
Open Access
Abstract
This work describes the fabrication of anisotropically etched, faceted pyramidal structures in amorphous layers of silicon dioxide or glass. Anisotropic and crystal‐oriented etching of silicon is well known. Anisotropic etching behavior in completely amorphous layers of silicon dioxide in combination with purely isotropic hydrofluoric acid as etchant is an unexpected phenomenon. The work presents practical exploitations of this new process for self‐perfecting pyramidal structures. It can be used for textured silica or glass surfaces. The reason for the observed anisotropy, leading to enhanced lateral etch rates, is the presence of thin metal layers. The lateral etch rate under the metal significantly exceeds the vertical etch rate of the non‐metallized area by a factor of about 6–43 for liquid and 59 for vapor‐based processes. The ratio between lateral and vertical etch rate, thus the sidewall inclination, can be controlled by etchant concentration and selected metal. The described process allows for direct fabrication of shallow angle pyramids, which for example can enhance the coupling efficiency of light emitting diodes or solar cells, can be exploited for producing dedicated silicon dioxide atomic force microscopy tips with a radius in the 50 nm range, or can potentially be used for surface plasmonics.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (326062881)
This publication has 32 references indexed in Scilit:
- Metal‐Assisted Chemical Etching of Silicon: A ReviewAdvanced Materials, 2010
- Applications of Microstructured Silicon Wafers as Internal Reflection Elements in Attenuated Total Reflection Fourier Transform Infrared SpectroscopyApplied Spectroscopy, 2010
- Wet-etching of structures with straight facets and adjustable taper into glass substratesLab on a Chip, 2009
- Etch rates for micromachining processing-part IIJournal of Microelectromechanical Systems, 2003
- Catalytic gas-phase fluorination of 1,1,1-trifluoro-2-chloroethane over chromium (III) oxide: Preparation of hydrofluoroalkanesApplied Catalysis B: Environment and Energy, 1995
- The corrosion behavior of CrP alloys in hydrofluoric acidCorrosion Science, 1993
- Anisotropic Etching of Crystalline Silicon in Alkaline Solutions: I . Orientation Dependence and Behavior of Passivation LayersJournal of the Electrochemical Society, 1990
- Substrate effects on the surface topography of evaporated gold films—A scanning tunnelling microscopy investigationSurface Science, 1989
- Detection of protective oxide layers on Cr formed by exposure to air by STEM-ELS methodSurface Science, 1981
- Intrinsic Stress in Evaporated Metal FilmsJournal of the Electrochemical Society, 1968