Fabrication and examination of oxidation resistance of zinc coated copper and brass components by chemical deposition
- 1 March 2011
- journal article
- research article
- Published by SAGE Publications in Surface Engineering
- Vol. 27 (5) , 362-367
Abstract
In this work, the structure and the oxidation resistance of Zn deposited Cu and brass metallic components are examined. The deposition was accomplished with pack cementation chemical deposition. The examination of the samples was performed with electron microscopy and X-ray diffraction analysis. It was found that coatings on Cu substrate consist of two layers with different Zn concentrations, while coatings on brass were single layered with almost constant Zn concentration. The presence of distinct Zn–Cu phases was revealed in both cases. The subjection of the as coated samples together with the uncoated substrates in air at 400°C showed that both Zn coated samples have enhanced resistivity in such atmospheres, as most of the coating remained mostly unoxidised, and the substrates were fully protected. On the contrary, the bare substrates appear to have undergone severe damage as brittle oxides were formed on their surface.Keywords
This publication has 13 references indexed in Scilit:
- Examination of the oxidation resistance of high-alloyed tool steels at elevated temperaturesApplied Surface Science, 2009
- Comparative examination of the microstructure and high temperature oxidation performance of NiCrBSi flame sprayed and pack cementation coatingsApplied Surface Science, 2009
- High temperature oxidation and corrosion in marine environments of thermal spray deposited coatingsApplied Surface Science, 2008
- Effect of temperature and zinc concentration on zinc coatings deposited with pack cementationSurface Engineering, 2008
- A comparative study of the structure and the corrosion behavior of zinc coatings deposited with various methodsSurface and Coatings Technology, 2006
- Zinc deposition with pack cementation on low carbon steel substratesJournal of Alloys and Compounds, 2006
- On the mechanism of formation of zinc pack coatingsJournal of Alloys and Compounds, 2006
- Oxidation behaviour of titanium coated copper substrateSurface and Coatings Technology, 2001
- The metallurgy of zinc-coated steelProgress in Materials Science, 2000
- Dynamic oxidation of a Cu—30vol.%Cr coating on a copper-based alloySurface and Coatings Technology, 1996