Identification of vehicle suspension parameters by design optimization
- 4 May 2013
- journal article
- research article
- Published by Taylor & Francis in Engineering Optimization
- Vol. 46 (5) , 669-686
Abstract
The design of a vehicle suspension system through simulation requires accurate representation of the design parameters. These parameters are usually difficult to measure or sometimes unavailable. This article proposes an efficient approach to identify the unknown parameters through optimization based on experimental results, where the covariance matrix adaptation–evolutionary strategy (CMA-es) is utilized to improve the simulation and experimental results against the kinematic and compliance tests. This speeds up the design and development cycle by recovering all the unknown data with respect to a set of kinematic measurements through a single optimization process. A case study employing a McPherson strut suspension system is modelled in a multi-body dynamic system. Three kinematic and compliance tests are examined, namely, vertical parallel wheel travel, opposite wheel travel and single wheel travel. The problem is formulated as a multi-objective optimization problem with 40 objectives and 49 design parameters. A hierarchical clustering method based on global sensitivity analysis is used to reduce the number of objectives to 30 by grouping correlated objectives together. Then, a dynamic summation of rank value is used as pseudo-objective functions to reformulate the multi-objective optimization to a single-objective optimization problem. The optimized results show a significant improvement in the correlation between the simulated model and the experimental model. Once accurate representation of the vehicle suspension model is achieved, further analysis, such as ride and handling performances, can be implemented for further optimization.Keywords
This publication has 13 references indexed in Scilit:
- Fast Optimization of Electromagnetic Design Problems Using the Covariance Matrix Adaptation Evolutionary StrategyIEEE Transactions on Antennas and Propagation, 2011
- The CMA-ES on Riemannian Manifolds to Reconstruct Shapes in 3-D Voxel ImagesIEEE Transactions on Evolutionary Computation, 2009
- A study on the use of non-parametric tests for analyzing the evolutionary algorithms’ behaviour: a case study on the CEC’2005 Special Session on Real Parameter OptimizationJournal of Heuristics, 2008
- The CMA Evolution Strategy: A Comparing Review2007
- Virtual Development of Ride and Handling Characteristics for Advanced Passenger CarsVehicle System Dynamics, 2003
- Evolutionary programming made fasterIEEE Transactions on Evolutionary Computation, 1999
- A comparison of SOM neural network and hierarchical clustering methodsEuropean Journal of Operational Research, 1996
- Design sensitivity analysis of mechanical systems in frequency domainJournal of Sound and Vibration, 1988
- An Examination of the Effect of Six Types of Error Perturbation on Fifteen Clustering AlgorithmsPsychometrika, 1980
- THE COMPARISON OF DENDROGRAMS BY OBJECTIVE METHODSTaxon, 1962