Sensor calibration of polymeric Hopkinson bars for dynamic testing of soft materials
- 9 January 2018
- journal article
- research article
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 29 (2) , 025601
Abstract
Split Hopkinson pressure bar (SHPB) testing is one of the most common techniques for the estimation of the constitutive behaviour of metallic materials. In this paper, the characterisation of soft rubber-like materials has been addressed by means of polymeric bars thanks to their reduced mechanical impedance. Due to their visco-elastic nature, polymeric bars are more sensitive to temperature changes than metallic bars, and due to their low conductance, the strain gauges used to measure the propagating wave in an SHPB may be exposed to significant heating. Consequently, a calibration procedure has been proposed to estimate quantitatively the temperature influence on strain gauge output. Furthermore, the calibration is used to determine the elastic modulus of the polymeric bars, which is an important parameter for the synchronisation of the propagation waves measured in the input and output bar strain gate stations, and for the correct determination of stress and strain evolution within the specimen. An example of the application has been reported in order to demonstrate the effectiveness of the technique. Different tests at different strain rates have been carried out on samples made of nytrile butadyene rubber (NBR) from the same injection moulding batch. Thanks to the correct synchronisation of the measured propagation waves measured by the strain gauges and applying the calibrated coefficients, the mechanical behaviour of the NBR material is obtained in terms of strain-rate–strain and stress–strain engineering curves.Keywords
This publication has 25 references indexed in Scilit:
- Implementation of viscoelastic Hopkinson barsEPJ Web of Conferences, 2012
- Effects of strain rate and temperature on the tension behavior of polycarbonateMaterials & Design (1980-2015), 2012
- Comparison of quasi-static and dynamic compression behavior of closed-cell aluminum foamMaterials Science and Engineering: A, 2009
- A measurement of wave propagation in the split Hopkinson pressure barMeasurement Science and Technology, 2009
- Thickness Effect of Pulse Shaper on Dynamic Stress Equilibrium in the NBR Rubber SpecimenKey Engineering Materials, 2006
- High-strain rate Brazilian testing of an explosive simulant using speckle metrologyMeasurement Science and Technology, 2004
- Review of experimental techniques for high rate deformation and shock studiesInternational Journal of Impact Engineering, 2004
- A freely expanding ring technique for measuring the tensile properties of polymersMeasurement Science and Technology, 1996
- How to Avoid Errors Caused by Heat Effects in Strain Gage Measurements when Using Scanning Units1986
- The dynamic compression testing of solids by the method of the split Hopkinson pressure barJournal of the Mechanics and Physics of Solids, 1963