Indoor Positioning of AGVs Based on Multi-Sensor Data Fusion Such as LiDAR
Authors:
Open Access
- 28 February 2024
- journal article
- research article
- Published by Science Publishing Group in International Journal of Sensors and Sensor Networks
- Vol. 12 (1) , 13-22
Abstract
In recent years, with the rapid growth in technology and demand for industrial robots, Automated Guided Vehicles (AGVs) have found widespread application in industrial workshops and smart logistics, emerging as a global hot research topic. Due to the volatile and complex working environments, the positioning technology of AGV robots is of paramount importance. To address the challenges associated with AGV robot positioning, such as significant accumulated errors in wheel odometer and Inertial Measurement Unit (IMU), susceptibility of Ultra Wide Band (UWB) positioning accuracy to Non Line of Sight (NLOS) errors, as well as the distortion points and drift in point clouds collected by LiDAR during robot motion, a novel positioning method is proposed. Initially, Weighted Extended Kalman Filter (W-EKF) is employed for the loosely coupled integration of wheel odometer and Ultra Wide Band (UWB) data, transformed into W-EKF pose factors. Subsequently, appropriate addition of W-EKF factors is made during the tight coupling of pre-integrated Inertial Measurement Unit (IMU) with 3D-LiDAR to counteract the distortion points, drift, and accumulated errors generated by LiDAR, thereby enhancing positioning accuracy. After experimentation, the algorithm achieved a final positioning error of only 6.9cm, representing an approximately 80% improvement in positioning accuracy compared to the loosely coupled integration of the two sensors.Keywords
This publication has 15 references indexed in Scilit:
- A ubiquitous positioning solution of integrating GNSS with LiDAR odometry and 3D map for autonomous driving in urban environmentsJournal of Geodesy, 2023
- Evaluation of 3D LiDAR SLAM algorithms based on the KITTI datasetThe Journal of Supercomputing, 2023
- Joint activity recognition and indoor localization with WiFi sensing based on multi-view fusion strategyDigital Signal Processing, 2022
- Fault tolerant multi-sensor data fusion for autonomous navigation in future civil aviation operationsControl Engineering Practice, 2022
- Multi-sensor information fusion for Internet of Things assisted automated guided vehicles in smart citySustainable Cities and Society, 2021
- Indoor multi-sensor fusion positioning based on federated filteringMeasurement, 2020
- Smart Fusion of Multi-sensor Ubiquitous Signals of Mobile Device for Localization in GNSS-Denied ScenariosWireless Personal Communications, 2018
- A fault tolerant architecture for data fusion: A real application of Kalman filters for mobile robot localizationRobotics and Autonomous Systems, 2017
- Multi-sensor data fusion methods for indoor localization under collinear ambiguityPervasive and Mobile Computing, 2016
- Potential use of ground‐based sensor technologies for weed detectionPest Management Science, 2013