Mechanical, Thermal, and Fire Properties of Composite Materials Based on Gypsum and PCM
Open Access
Abstract
One of the solutions for overheating the interior in the summer without increasing energy consumption is the integration of phase change material (PCM) into interior plasters. However, adding PCM to plasters deteriorates their properties and thus their usability. The aim of this paper is to determine how the microencapsulated PCM affects the mechanical, thermal, and fire properties of plasters and how much PCM can be added to the plaster. Two sets of samples were prepared: in set S, part of the aggregate was replaced by PCM; and in set R, only PCM was added. The bulk density, flexural strength, compressive strength, tensile strength perpendicular to the surface, thermal conductivity coefficient, specific heat capacity, melting, and solidification temperatures and enthalpy were measured. A single-flame source fire test and a gross heat of combustion fire test were performed to determine the reaction to the fire class. The results show that with an increasing proportion of PCM, the strength of the samples of set R decreased more significantly than it did with the samples of set S. It was found that only up to about 10% PCM could be added to set R, while up to 30% PCM could be added to set S.Keywords
Funding Information
- Vysoká Škola Bánská - Technická Univerzita Ostrava (SP2021/82)
This publication has 48 references indexed in Scilit:
- Experimental Investigation of the Properties of Lime-Based Plaster-Containing PCM for Enhancing the Heat-Storage Capacity of Building EnvelopesInternational Journal of Thermophysics, 2013
- Gypsum plasterboards enhanced with phase change materials: A fire safety assessment using experimental and computational techniquesMATEC Web of Conferences, 2013
- Gypsum based composite materials with micro-encapsulated PCM: Experimental correlations for thermal properties estimation on the basis of the compositionEnergy and Buildings, 2013
- Materials used as PCM in thermal energy storage in buildings: A reviewRenewable and Sustainable Energy Reviews, 2011
- Development of phase change materials based microencapsulated technology for buildings: A reviewRenewable and Sustainable Energy Reviews, 2011
- A review on phase change materials integrated in building wallsRenewable and Sustainable Energy Reviews, 2011
- Review on thermal energy storage with phase change materials and applicationsRenewable and Sustainable Energy Reviews, 2009
- An assessment of mixed type PCM-gypsum and shape-stabilized PCM plates in a building for passive solar heatingSolar Energy, 2007
- The setting of gypsum plasterJournal of Materials Science, 1994
- The setting of gypsum plasterJournal of Materials Science, 1994