Effect of cross‐link density on the high pressure crystallization of UHMWPE
- 11 February 2009
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 90B (2) , 720-729
Abstract
Ultrahigh molecular weight polyethylene (UHMWPE) is a bearing surface material for total joint implants. It is radiation cross‐linked for high wear resistance and is melted or treated with vitamin E for oxidative stability. We investigated high pressure crystallization (HPC) of irradiated UHMWPE as an alternative method to improve the mechanical strength while stabilizing the residual free radicals from radiation cross‐linking. HPC of uncross‐linked UHMWPE has resulted in the formation of extended chain crystals and increased crystallinity, leading to improved strength. We hypothesized that increased cross‐link density would hinder crystallization during HPC due to decreased chain mobility. Therefore, we investigated the crystalline structure and tensile mechanical properties of high pressure crystallized 25‐, 65‐ and 100‐kGy irradiated UHMWPE. We also determined free radical content and wear. The strength of 25‐ and 65‐kGy irradiated UHMWPEs was improved by HPC with increased crystallinity and crystal size. 100‐kGy irradiated UHMWPE did not show improved strength, supporting our hypothesis that decreased chain mobility would hinder crystal formation and strength improvement. None of the HPC irradiated UHMWPEs contained detectable free radicals and their wear properties were maintained, suggesting oxidative and mechanical stability in the long term. Therefore, HPC can be used effectively for imparting oxidative stability while strength improvement can be achieved for irradiated UHMWPE with low to moderate cross‐link density. © 2009 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2009Keywords
This publication has 23 references indexed in Scilit:
- Diffusion of vitamin E in ultra-high molecular weight polyethyleneBiomaterials, 2007
- Comparative fatigue behavior and toughness of remelted and annealed highly crosslinked polyethylenesJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2007
- Wear Resistance and Mechanical Properties of Highly Cross-linked, Ultrahigh–Molecular Weight Polyethylene Doped With Vitamin EThe Journal of Arthroplasty, 2006
- The combined effects of crosslinking and high crystallinity on the microstructural and mechanical properties of ultra high molecular weight polyethyleneBiomaterials, 2006
- Mechanisms of decrease in fatigue crack propagation resistance in irradiated and melted UHMWPEBiomaterials, 2006
- Characterization of irradiated blends of -tocopherol and UHMWPEBiomaterials, 2005
- The effects of degree of crosslinking on the fatigue crack initiation and propagation resistance of orthopedic‐grade polyethyleneJournal of Biomedical Materials Research Part A, 2003
- Self-induced field model for crystal twisting in spherulitesPolymer, 2003
- Wear particles of total joint replacements and their role in periprosthetic osteolysisCurrent Opinion in Rheumatology, 1992
- Crystallization and melting of polyethylene under high pressure. I. Crystallization by slow cooling from the meltJournal of Polymer Science: Polymer Physics Edition, 1974