Analytical Modeling of Modular and Unequal Tooth Width Surface-Mounted Permanent Magnet Machines
Authors:
- 13 May 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 51 (9) , 1-9
Abstract
This paper presents a simple analytical model for two types of three-phase surface-mounted permanent magnet machines: modular and unequal tooth (UNET) width machines with different slot/pole number combinations. It is based on the slotless open-circuit air-gap flux density and the slotted air-gap relative permeance calculations. This model allows calculating the opencircuit air-gap flux density, phase flux linkage, back electromotive force, and average torque of both the modular and UNET machines. Its accuracy has been validated by the 2-D finite-element (FE) method. A flux focusing/defocusing factor has also been introduced to analyze the influence of flux gaps in alternate stator teeth of modular machines on the machine electromagnetic performances. It has been found that by properly choosing the slot/pole number combination and flux gap width, the open-circuit air-gap flux density, the winding factor, and the flux focusing effect can all be improved. As a result, the performance of the modular machine can be significantly boosted. The analytical and FE models have been validated by experiments.Keywords
This publication has 17 references indexed in Scilit:
- Analytical Approach for Air-Gap Modeling of Field-Excited Flux-Switching Machine: No-Load OperationIEEE Transactions on Magnetics, 2012
- Design, analysis and implementation of a subfractional slot concentrated winding BLDCM with unequal tooth widths2011
- Analytical Solution for Cogging Torque in Surface Permanent-Magnet Motors Using Conformal MappingIEEE Transactions on Magnetics, 2007
- Design of High-Performance Spindle Motors With Single-Layer Concentrated Windings and Unequal Tooth WidthsIEEE Transactions on Magnetics, 2007
- Analytical calculation of magnetic field distribution in the slotted air gap of a surface permanent-magnet motor using complex relative air-gap permeanceIEEE Transactions on Magnetics, 2006
- Comparison of PM brushless motors, having either all teeth or alternate teeth woundIEEE Transactions on Energy Conversion, 2006
- Permanent-Magnet Brushless Machines With Unequal Tooth Widths and Similar Slot and Pole NumbersIEEE Transactions on Industry Applications, 2005
- Improved analytical model for predicting the magnetic field distribution in brushless permanent-magnet machinesIEEE Transactions on Magnetics, 2002
- A modular, permanent-magnet generator for variable speed wind turbines1995
- Analytical prediction of the cogging torque in radial-field permanent magnet brushless motorsIEEE Transactions on Magnetics, 1992