Evaluation of the Performance of New Type of Segmented Stator Permanent Magnet Synchronous Motor
Open Access
- 25 April 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 75563-75575
Abstract
The paper presents the evaluation study to enhance the design of the motor’s permanent magnet (PM), with the goal of increasing the performance of the segmented stator Permanent Magnet Synchronous Motor (PMSM). The rotor is externally mounted and embedded permanent magnet placed into the groove. By adjusting the width, tip angle, ratio dimension and skew angle of the PMs optimize the magnetic flux flow inside the motor thereby improving performance of the motor under considerations. Finite Element Method (FEM) is used to evaluate for optimizing the parameters to reach the maximum torque through parametric optimization. The numerical results are compared in terms of static torque, cogging torque, iron losses, torque-to-detent torque ratio, and torque constant parameter variations of the models. The findings with optimized flux flow evolve a new type of outer rotor embedded PMSM structure that is fabricated and tested for practical adoption for static and dynamic characteristics. The proposed new type of segmented rotor exhibits low cogging torque with torque ratio of 62 against the conventional structure with value of 14. The proposed model is fabricated and evaluated for its performance against the numerical results and are in close agreement.Keywords
Funding Information
- Universiti Putra Malaysia (BP-GPB/2022/9719300)
This publication has 19 references indexed in Scilit:
- Design and analysis of consequent pole permanent magnet synchronous motor with low torque rippleIET Electric Power Applications, 2022
- A Critical Review of Emerging Technologies for Electric and Hybrid VehiclesIEEE Open Journal of Vehicular Technology, 2021
- Enhancing Torque performance with Dual Teeth Switched Reluctance Motor: A Novel Approach2021
- A Critical Review of Advanced Electric Machines and Control Strategies for Electric VehiclesProceedings of the IEEE, 2020
- Analysis and Comparison of the Interior Permanent Magnet Motor Design with Different Magnetic Materials2020
- Divided Teeth Switched Reluctance Motor with Different Tooth Combinations2020
- Development of a 20-Pole–24-Slot SPMSM With Consequent Pole Rotor for In-Wheel Direct DriveIEEE Transactions on Industrial Electronics, 2015
- Fractional Slot Concentrated Winding PMSM With Consequent Pole Rotor for a Low-Speed Direct Drive: Reduction of Rare Earth Permanent MagnetIEEE Transactions on Energy Conversion, 2014
- Comparison of in-wheel permanent magnet motors for electric traction2014
- Performance of Low-Cost Permanent Magnet Material in PM Synchronous MachinesIEEE Transactions on Industrial Electronics, 2012