Study on the Influence of Etchant Composition and Etching Process on the Precision of Stainless‐Steel Microchannel and Etching Mechanism
Authors:
- 17 April 2024
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (10)
Abstract
The chemical etching method has the advantages of high precision and low cost for the preparation of steel surface microchannel, but the composition of the etching solution and the etching process have a great influence on the precision of the microstructure. In this article, the influence of etching solution composition and the etching time on the etching precision of stainless steel using a mixture of HCl and H2O2 as an etching solution is studied. The reactions and passivation processes that occur during the etching process are analyzed. The etching mechanism is revealed. The sample prepared with HCl:H2O2 = 1:2 can obtain better etching precision and high‐dimensional stability. The amount of lateral erosion and the depth of etching increases with the increase of etching time, resulting in a decrease in the etching factor and precision. Pitting and intergranular corrosion mainly occur during the etching process, and the loss of metal chloride formed in the process forms holes, which become rapid diffusion channels for corrosive Cl and O elements, and promotes the etching process. The etching reaction forms a passivation film on the surface of the substrate, which reduces the rate of the etching reaction.Keywords
Funding Information
- National Natural Science Foundation of China (51701154)
This publication has 24 references indexed in Scilit:
- Non-negligible corrosion from vaporized boric acid on 304 stainless steelJournal of Nuclear Materials, 2022
- Formation and Evolution of Corrosion Product Film on 304 Stainless Steel in HCl-Based Pickling Solution under Chemical OxidationJournal of Materials Engineering and Performance, 2022
- Research on the erosion-corrosion mechanism of 304 stainless steel pipeline of mine water in falling film flowCorrosion Science, 2022
- Compromising Science by Ignorant Instrument Calibration—Need to Revisit Half a Century of Published XPS DataAngewandte Chemie International Edition, 2020
- Facile fabrication of superhydrophobic surfaces from austenitic stainless steel (AISI 304) by chemical etchingApplied Surface Science, 2018
- Uniform trench arrays with controllable tilted profiles using metal-assisted chemical etchingApplied Surface Science, 2015
- Statistical study of the critical pitting temperature of 22-05 duplex stainless steelCorrosion Science, 2012
- The history of the Point Defect Model for the passive state: A brief review of film growth aspectsElectrochimica Acta, 2011
- Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and NiApplied Surface Science, 2011
- Erosion–corrosion of stainless steel under impingement by a fluid jetCorrosion Science, 2007