The influence of talc as a nucleation agent on the nonisothermal crystallization and morphology of isotactic polypropylene: The application of the Lauritzen–Hoffmann, Avrami, and Ozawa theories
Authors:
- 27 April 2012
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 126 (4) , 1207-1217
Abstract
A new method is proposed, which can be used to analyze the influence of different additives and fillers on the nonisothermal crystallization of polymers. The composites of talc in isotactic polypropylene (i‐PP) were prepared using a corotating twin‐screw extruder. The compounds were subsequently dried and injection molded. PP morphology and talc dispersion were visualized using optical microscopy and computed tomography. Wide‐angle X‐ray scattering and small‐angle X‐ray scattering measurements provided an insight into the crystal structure of PP. The data obtained from nonisothermal DSC measurements were fitted to the Avrami model for the nonisothermal case. The calculated Avrami's exponent (n), which takes into account the influence of talc on the nucleation and growth of the PP crystals, was used in the combination of Lauritzen–Hoffman and Ozawa models to calculate the nucleation parameter (Kg). A good agreement was found between the model predictions and literature values. The examination shows that the developed model extension gives an expected trend in the case of i‐PP filled with talcs from the same origin but with different particle sizes. Furthermore, it is shown that delaminated talc with a higher specific surface is more efficient in nucleation of i‐PP. Thus, the introduced model extension could be a useful tool for comparing of nucleation ability of different additives in the crystallization of polymers. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012Keywords
This publication has 36 references indexed in Scilit:
- Crystallization of polypropylene at various cooling ratesMaterials Science and Engineering: A, 2005
- On enhanced impact strength of calcium carbonate-reinforced high-density polyethylene compositesMaterials Science and Engineering: A, 2005
- Crystallization kinetics and nucleation activity of filler in polypropylene/surface-treated SiO2 nanocompositesThermochimica Acta, 2005
- Crystallization kinetics and solidified structure in iPP under high cooling ratesPolymer, 2003
- The effect of specific β‐nucleation on morphology and mechanical behavior of isotactic polypropyleneJournal of Applied Polymer Science, 2002
- Structure and properties of injection‐molded polypropylenes with different molecular weight distribution and tacticity characteristicsJournal of Applied Polymer Science, 2002
- Structures and properties of injection moldings of crystallization nucleator‐added polypropylenes. II. Distribution of higher‐order structuresJournal of Applied Polymer Science, 1991
- Non‐isothermal crystallization of poly(etheretherketone) aromatic polymer compositePolymer Composites, 1988
- Character of crystallization nuclei in isotactic polypropyleneJournal of Applied Polymer Science, 1982
- Kinetics of polymer crystallization from the melt (calorimetric approach)Journal of Polymer Science: Polymer Physics Edition, 1974