An effective method and pathways of acrylonitrile degradation to acrylic acid through an alkaline hydrothermal system
Authors:
- 28 February 2017
- journal article
- research article
- Published by Taylor & Francis in Environmental Technology
- Vol. 38 (13-14) , 1702-1707
Abstract
Degradation of pollution for specific chemicals represents an optimal approach to high-strength wastewater treatment. One-pot selective conversion of acrylonitrile to acrylic acid in a hydrothermal system with NaOH as a catalyst was carried out. The influence factors were evaluated, including initial acrylonitrile concentration, reaction temperature, reaction time and amount of alkali. Experimental results showed that the highest yield of acrylic acid (55%) was obtained at the initial acrylonitrile concentration of 3 × 103 mg/L, 300°C for 90 s with 1.0 M NaOH. To determine the reaction path, intermediates analysis and calculation of carbon and nitrogen balance were carried out by means of HPLC, GC and TOC/TN methods. Two probable reaction pathways were proposed as follows: (1) Acrylonitrile was hydrolyzed into acrylamide, and acrylic acid was obtained via further hydrolysis. (2) Acrylonitrile was converted into 3-hydroxy-propionitrile via additive reaction, and this product was readily converted to 3-hydroxy-propionic acid through two steps of hydrolysis, followed by dehydration reaction to produce acrylic acid. This study offered not only an efficient method to transfer highly toxic pollutants into valuable chemical, but also a better understanding of hydrothermal alkali catalytic reaction.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities
- National Natural Science Foundation of China
- International Collaborative Project from Shanghai Science and Technology Commission
This publication has 20 references indexed in Scilit:
- Biodegradability evaluation of pollutants in acrylonitrile wastewaters based on particle size distributionDesalination and Water Treatment, 2015
- Hydration of acrylonitrile to produce acrylamide using biocatalyst in a membrane dispersion microreactorBioresource Technology, 2014
- Life Cycle Assessment comparison of two ways for acrylonitrile production: the SOHIO process and an alternative route using propaneJournal of Cleaner Production, 2014
- Treatment of wastewater from acrylonitrile‐butadiene‐styrene (ABS) resin manufacturing by biological activated carbon (BAC)Journal of Chemical Technology & Biotechnology, 2012
- Environmental and eco-costs life cycle assessment of an acrylonitrile process by capacity enlargement in MexicoProcess Safety and Environmental Protection, 2012
- Three advanced oxidation processes for the treatment of the wastewater from acrylonitrile productionWater Science & Technology, 2009
- Synergetic effect of copper-plating wastewater as a catalyst for the destruction of acrylonitrile wastewater in supercritical water oxidationJournal of Hazardous Materials, 2009
- Supercritical water oxidation of wastewater from acrylonitrile manufacturing plantJournal of Hazardous Materials, 2009
- Optimization of process parameters for acrylonitrile removal by a low-cost adsorbent using Box–Behnken designJournal of Hazardous Materials, 2008
- Advanced oxidation processes (AOP) for water purification and recoveryCatalysis Today, 1999