High-Temperature Performance Enhancement of Bitumen by Waste PET-Derived Polyurethane
Open Access
- 14 October 2022
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-15
Abstract
Bitumen performance enhancement through modification by reactive polymers gained significant attention in the road construction industry. Polymeric bitumen additives, such as polyurethane, improve bitumen properties at low and high in-service temperatures. This research aimed to increase the polymer content (polyurethane) from 3% to 5%wt of bitumen by introducing cross-linking agent, sulfur. Synthesis of polyurethane was via in situ polymerization of bis (2-hydroxyethyl) terephthalamide (BHETA) in the presence of bitumen with sulfur as a cross-linking agent. BHETA was produced from polyethylene terephthalate (PET) by an aminolysis reaction. Penetration and softening point, frequency sweep test, performance grade (PG) and multiple stress creep recovery (MSCR) were evaluated to compare base and modified bitumen. Results show that the penetration and softening point of modified binders were reduced and increased, respectively, the frequency sweep test indicated improvement in viscoelastic properties of modified bitumen, PG of base bitumen was enhanced by two grades, i.e., from 58°C to 70°C, and the nonrecoverable creep compliance was increased by 81.82% at polymer content of 4% and sulfur content of 0.2%. The FTIR spectra of modified bitumen confirmed the formation of urethane linkages. Therefore, aminolysis of waste PET and in-situ polymerization to produce polyurethane can be applied to improve the performance of bitumen at high temperatures.Keywords
This publication has 51 references indexed in Scilit:
- Aminolytic depolymerization of poly (ethylene terephthalate) bottle waste by conventional and microwave irradiation heatingJournal of Applied Polymer Science, 2011
- Novel stable MDI isocyanate-based bituminous foamsFuel, 2011
- Synthesis and characterization of novel polyurethanes based on aminolysis of poly(ethylene terephthalate) wastes, and evaluation of their thermal and mechanical propertiesPolymer International, 2008
- The Morphology of Bitumen-SBS Blends by UV Microscopy. An Evaluation of Preparation MethodsRoad Materials and Pavement Design, 2008
- Bitumen modification with a low-molecular-weight reactive isocyanate-terminated polymerFuel, 2007
- Polymer modified asphalt bindersConstruction and Building Materials, 2007
- Aminolysis of polyethylene terephthalate wastePolymer Degradation and Stability, 2006
- Rheological evaluation of ethylene vinyl acetate polymer modified bitumensConstruction and Building Materials, 2002
- Improved properties of SBS‐modified asphalt with dynamic vulcanizationPolymer Engineering & Science, 2002
- Rheological characterization of storage-stable SBS-modified asphaltsPolymer Testing, 2002