Performance and Leaching Assessment of Flowable Slurry
Authors:
- 1 April 2001
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 127 (4) , 359-368
Abstract
This project was conducted to evaluate the performance and leaching of controlled low strength materials (CLSM) incorporating fly ash and foundry sand. Two different CLSM (or flowable slurry) reference mixtures (equivalent to available production CLSM mixtures) were proportioned for unconfined compressive strength levels in the range of 0.3–0.7 MPa (50–100 psi), at 28 days, using two sources of ASTM Class F fly ash. For each reference mixture, other mixtures were proportioned using two sources of foundry sand (molten metal-casting mold sand) as a replacement for fly ash in the range of 30–85%. The ingredients of the slurry mixtures—fly ash, clean foundry sand, and used foundry sand—were tested for their physical and chemical properties and their leachate characteristics. Portland cement used as the primary binder was also tested for its properties. All CLSM mixtures made with and without foundry sand were evaluated for settlement, setting and hardening characteristics, compressive strength, permeability, and leachate characteristics. The leachate results of these CLSM-making materials were below the enforcement standards (ES) of the Wisconsin Department of Natural Resources (WDNR) ground-water quality standards (GWQS). They also met practically all the parameters of the drinking water standards. A number of CLSM mixtures incorporating fly ash and foundry sand are recommended for construction applications.Keywords
This publication has 7 references indexed in Scilit:
- Flowable Slurry Containing Foundry SandsJournal of Materials in Civil Engineering, 1997
- Permeability of Flowable Slurry Materials Containing Foundry Sand and Fly AshJournal of Geotechnical and Geoenvironmental Engineering, 1997
- Application of Foundry By-Product Materials in Manufacture of Concrete and Masonry ProductsACI Materials Journal, 1996
- Use of fly ash slurry for underground facility constructionConstruction and Building Materials, 1994
- Organic Compounds in Ferrous Foundry Process Waste LeachatesJournal of Environmental Engineering, 1993
- Durability of MSW Fly‐Ash ConcreteJournal of Materials in Civil Engineering, 1992
- Leachability of Foundry Process Solid WastesJournal of the Environmental Engineering Division, 1981