Effect of Solution Heat-Treatment on the Oxidation Resistance of Ni-Base Single-Crystal Superalloy
Authors:
Open Access
- 2 October 2023
- journal article
- research article
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 54 (12) , 4825-4833
Abstract
To clarify the effect of solution heat-treatment on the oxidation resistance of Ni-base single-crystal superalloy TMS-238, the evaluation of dendrite/inter-dendrite segregation of alloying elements in the as-cast and heat-treated samples, and its effect on cyclic oxidation resistance were investigated. Cyclic oxidation test results at 1100 °C for up to 150 cycles clearly showed that the as-cast samples with element segregations had lower oxidation resistance compared to heat-treated samples with homogeneous structure. Further, for the as-cast sample, rapid growth and spallation of oxide consisting of NiO, Cr2O3, and Al2O3 were observed around the dendrite core for 10 cycles of oxidation. Analysis of sub-surface on sample isothermally oxidized at 1100 °C for 10 minutes showed that rapid oxide growth is due to the formation of discontinuous Al2O3 layer at dendrite core with lower Al concentration. Furthermore, in this study, the threshold value of Al concentration and Gibbs energy for the formation of continuous Al2O3 layer were estimated and determined to be around 5.2 wt pct and − 556.6 ± 0.5 kJ/mol, respectively. This indicated that the solution heat-treatment for TMS-238 should be conducted above 1305 °C for exhibiting oxidation resistance at 1100 °C, to meet the threshold value within the whole region between dendrite and inter-dendrite.Keywords
This publication has 23 references indexed in Scilit:
- Prediction of Initial Oxidation Behavior of Ni‐Base Single Crystal Superalloys: A New Oxidation Map and Regression Analysis2012
- Development of an Oxidation‐Resistant High‐Strength Sixth‐Generation Single‐Crystal Superalloy TMS‐2382012
- On the Oxidation Resistance of Nickel-Based SuperalloysAdvanced Materials Research, 2011
- Oxidation of nickel-based single-crystal superalloys for industrial gas turbine applicationsActa Materialia, 2011
- Comments on Studies on High Temperature Oxidation of Metals and AlloysCorrosion Engineering, 2011
- Oxidation Behavior of a Single-Crystal Ni-base Superalloy in Air at 900, 1000 and 1100°COxidation of Metals, 2006
- Oxidation of alloys2006
- Temperature Dependence of Oxidation Properties for 5th Generation Ni-Base Single-Crystal SuperalloysJournal of the Japan Institute of Metals and Materials, 2006
- Effect of Alloying Elements on the Oxidation Resistance of 4th Generation Ni-base Single-crystal SuperalloysJournal of the Japan Institute of Metals and Materials, 2005
- Oxidation of Ni-Cr-Al Alloys Between 1000° and 1200°CJournal of the Electrochemical Society, 1971