Parametric Optimization and Thermodynamic Performance Comparison of Organic Trans-Critical Cycle, Steam Flash Cycle, and Steam Dual-Pressure Cycle for Waste Heat Recovery
Open Access
Abstract
Compared with the basic organic and steam Rankine cycles, the organic trans-critical cycle (OTC), steam flash cycle (SFC) and steam dual-pressure cycle (SDC) can be regarded as the improved cycle configurations for the waste heat power recovery since they can achieve better temperature matching between the heat source and working fluid in the heat addition process. This study investigates and compares the thermodynamic performance of the OTC, SFC, and SDC based on the waste heat source from the cement kiln with an initial temperature of 320 °C and mass flow rate of 86.2 kg/s. The effects of the main parameters on the cycle performance are analyzed and the parameter optimization is performed with net power output as the objective function. Results indicate that the maximum net power output of SDC is slightly higher than that of SFC and the OTC using n-pentane provides a 19.74% increase in net power output over the SDC since it can achieve the higher use of waste heat and higher turbine efficiency. However, the turbine inlet temperature of the OTC is limited by the thermal stability of the organic working fluid, hence the SDC outputs more power than that of the OTC when the initial temperature of the exhaust gas exceeds 415 °C.Keywords
Funding Information
- National Natural Science Foundation of China (51376134)
This publication has 22 references indexed in Scilit:
- Thermodynamic performance analysis and algorithm model of multi-pressure heat recovery steam generators (HRSG) based on heat exchangers layoutEnergy Conversion and Management, 2014
- A multi-criteria approach for the optimal selection of working fluid and design parameters in Organic Rankine Cycle systemsApplied Energy, 2014
- Binary ORC (Organic Rankine Cycles) power plants for the exploitation of medium–low temperature geothermal sources – Part B: Techno-economic optimizationEnergy, 2014
- Energetic and exergetic analysis of waste heat recovery systems in the cement industryEnergy, 2013
- A review of working fluid and expander selections for organic Rankine cycleRenewable and Sustainable Energy Reviews, 2013
- Thermodynamic analysis and optimization of an (organic Rankine cycle) ORC using low grade heat sourceEnergy, 2013
- An open steam power cycle used for IC engine exhaust gas energy recoveryEnergy, 2012
- Estimation of performance of steam turbines using a simple predictive toolApplied Thermal Engineering, 2010
- Experimental investigation on the thermal stability of some new zero ODP refrigerantsInternational Journal of Refrigeration, 2003
- Description of the SMR cycle, which combines fluid elements of steam and organic Rankine cyclesEnergy, 1995