Interface Modulator of Ultrathin Magnesium Oxide for Low‐Temperature‐Processed Inorganic CsPbIBr2 Perovskite Solar Cells with Efficiency Over 11%
Authors:
Abstract
Although the power conversion efficiency (PCE) of thermally stable inorganic CsPbIBr2 perovskite solar cells (PSCs) is over 10%, the severe interfacial and nonradiative recombination deteriorates the open‐circuit voltage (Voc). Herein, an ultrathin wideband MgO is mediated between the SnO2 electron transport layer (ETL) and the CsPbIBr2 photoabsorber to passivate the undesirable recombination, thereby enhancing the Voc. Meanwhile, the δ‐phase perovskite located at the interface between SnO2 ETL and CsPbIBr2 film is reduced after MgO modification, because the MgO layer provides a substrate for perovskite growth and reduces vacancy. Moreover, the tunneling effect and better band alignment effectively block holes and accelerate electrons to the electrode. Consequently, for optimal MgO‐modified devices, a shining improvement of Voc from 1.25 to 1.36 V without short‐circuit current losses boosts the champion CsPbIBr2 PSCs to obtain a PCE of 11.04%, which is the highest value among the pure‐CsPbIBr2 PSCs. However, the MgO layer significantly reduces severe hysteresis and increases device stability.Keywords
Funding Information
- National Natural Science Foundation of China (61574024, 11974063)
- Chongqing Municipal Postdoctoral Science Special Foundation (cstc2019jcyj-bsh0026)
This publication has 66 references indexed in Scilit:
- Surface passivation of perovskite film for efficient solar cellsNature Photonics, 2019
- Alkali Chlorides for the Suppression of the Interfacial Recombination in Inverted Planar Perovskite Solar CellsAdvanced Energy Materials, 2019
- Direct Evidence of Ion Diffusion for the Silver‐Electrode‐Induced Thermal Degradation of Inverted Perovskite Solar CellsAdvanced Energy Materials, 2017
- Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performanceScience, 2016
- Transparent Conductive Oxide-Free Perovskite Solar Cells with PEDOT:PSS as Transparent ElectrodeACS Applied Materials & Interfaces, 2015
- Low-Temperature Solution-Processed Tin Oxide as an Alternative Electron Transporting Layer for Efficient Perovskite Solar CellsJournal of the American Chemical Society, 2015
- Compositional engineering of perovskite materials for high-performance solar cellsNature, 2015
- Efficiency enhancement of planar perovskite solar cells by adding zwitterion/LiF double interlayers for electron collectionNanoscale, 2014
- Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite AbsorberScience, 2013
- Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic CellsJournal of the American Chemical Society, 2009