Numerical Study on the Effect of Channel Configuration on Mixture Formation of an Axial Flow Wave Rotor Combustor
Authors:
- 6 June 2024
- journal article
- research article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 146 (12)
Abstract
Wave rotor combustor technology is a new technical means to improve the thermal efficiency of aero-engine by using unsteady flow and constant volume combustion. In this article, the influence of wave rotor combustor channel structure on the mixture formation in the channel was studied by numerical simulation. The results showed that the internal flow field structure and change of any structure channel are similar. Flow separation will occur in all channels, and wake regions will be formed in the channels. The turbulence kinetic energy in the wake region was increased, and the velocity and pressure were decreased, resulting in the vortex in the channel. When the channel width was reduced to half of the original design, the relative standard deviation (RSD) of the mixture was reduced by at least 54.92% compared to the original design, and the global fuel mass fraction in the channel was increased by at least 27.32%. In addition, the fluctuation of discharge pressure was also reduced. The reduction of the channel height does not lead to a significant improvement in the aforementioned results. This study can provide guidance for the structural design of wave rotor combustor channel.Keywords
Funding Information
- Natural Science Foundation of Jiangsu Province (BK20210278)
This publication has 14 references indexed in Scilit:
- Research on the working characteristics of wave rotor combustor hot jet igniter and its validationApplied Thermal Engineering, 2023
- Investigation on wave system matching of two-phase pressure oscillation tubeInternational Journal of Refrigeration, 2022
- Simulation of combustion characteristics in a hydrogen fuelled lean single-element direct injection combustorInternational Journal of Hydrogen Energy, 2017
- Large Eddy Simulation of the flame stabilization process in a scramjet combustor with rearwall-expansion cavityInternational Journal of Hydrogen Energy, 2016
- A Review of Wave Rotor Technology and Its ApplicationsJournal of Engineering for Gas Turbines and Power, 2006
- Pulse detonation propulsion: challenges, current status, and future perspectiveProgress in Energy and Combustion Science, 2004
- Two-Dimensional Flow and NOx Emissions in Deflagrative Internal Combustion Wave Rotor ConfigurationsJournal of Engineering for Gas Turbines and Power, 2003
- Assessment of Combustion Modes for Internal Combustion Wave RotorsJournal of Engineering for Gas Turbines and Power, 1999
- A Numerical Investigation of Premixed Combustion in Wave RotorsJournal of Engineering for Gas Turbines and Power, 1997
- Some remarks on the PISO and SIMPLE algorithms for steady turbulent flow problemsComputers & Fluids, 1989