Study on Infrared Transmittance of Si-Polymer Hybrid Structure Press Molded Using a Coupling Agent
Authors:
Open Access
- 5 November 2019
- journal article
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 13 (6) , 817-824
Abstract
Hybrid structures of single-crystal silicon and high-density polyethylene (HDPE) with high transmittance in the mid-to-far infrared region are used as infrared lens substrates. The hybrids are usually fabricated by high-precision press molding. The Si-HDPE hybrid lens previously fabricated had a low transmittance in the 9–10 μm wavelength region, thereby limiting its application for human body detection. In this study, a Si-polymer hybrid structure was fabricated using a new polymer without any silane coupling agent. Interfacial adhesion between the polymer and the Si substrate was realized with an extremely thin (a few micron thick) layer of an interfacial silane coupling agent. The press molding conditions that led to improved bonding strength and infrared transmittance of the hybrid substrate were investigated. A transmittance similar to that of a single-crystal Si substrate was achieved in the 9–10 μm wavelength range.Keywords
This publication has 20 references indexed in Scilit:
- Development of Heating and Cooling Injection Mold with Far-Infrared Radiation HeaterInternational Journal of Automation Technology, 2016
- Press molding of a Si–HDPE hybrid lens substrate and evaluation of its infrared optical propertiesPrecision Engineering, 2016
- Mid-infrared all-optical modulation in low-loss germanium-on-silicon waveguidesOptics Letters, 2015
- Silane coupling agents used for natural fiber/polymer composites: A reviewComposites Part A: Applied Science and Manufacturing, 2010
- FTIR analysis of silane grafted high density polyethylenePlastics, Rubber and Composites: Macromolecular Engineering, 2009
- Silicon waveguided components for the long-wave infrared regionJournal of Optics A: Pure and Applied Optics, 2006
- Surface analysis of Co–Cr–Mo alloy and Ti substrates silanized with trialkoxysilanes and silane mixturesSurface and Interface Analysis, 2004
- Chemical modification of henequén fibers with an organosilane coupling agentComposites Part B: Engineering, 1999
- Grafting of polyethylenes by reactive extrusion. I. Influence on the molecular structureJournal of Applied Polymer Science, 1998
- Silane grafting reactions of low‐density polyethyleneJournal of Applied Polymer Science, 1998