Improved Performance of All‐Solid‐State Lithium Metal Batteries via Physical and Chemical Interfacial Control
Open Access
- 10 November 2021
- journal article
- research article
- Published by Wiley in Advanced Science
- Vol. 9 (2) , 2103433
Abstract
Lithium metal batteries (LMBs) show several limitations, such as high flammability and Li dendrite growth. All‐solid‐state LMBs (ASSLMBs) are promising alternatives to conventional liquid electrolyte (LE)‐based LMBs. However, it is challenging to prepare a solid electrolyte with both high ionic conductivity and low electrode–electrolyte interfacial resistance. In this study, to overcome these problems, a solid composite electrolyte (SCE) consisting of Li6.25La3Zr2Al0.25O12 and polyvinylidene fluoride‐co‐hexafluoropropylene is used, which has attracted considerable attention in recent years as a solid‐state electrolyte. To operate LMBs without an LE, optimization of the electrode–solid‐electrolyte interface is crucial. To achieve this, physical and chemical treatments are performed, i.e., direct growth of each layer by drop casting and thermal evaporation, and plasma treatment before the Li evaporation process, respectively. The optimized ASSLMB (amorphous V2O5−x (1 µm)/SCE (30 µm)/Li film (10 µm)) has a high discharge capacity of 136.13 mAh g−1 (at 50 °C and 5 C), which is 90% of that of an LMB with an LE. It also shows good cycling performance (>99%) over 1000 cycles. Thus, the proposed design minimizes the electrode–solid‐electrolyte interfacial resistance, and is expected to be suitable for integration with existing commercial processes.Keywords
Funding Information
- National Research Foundation of Korea (NRF‐2020R1A6A3A13077360, NRF‐2021R1A6A1A03043682)
- Korea Institute of Energy Technology Evaluation and Planning
- Ministry of Trade, Industry and Energy (20164010201070)
This publication has 66 references indexed in Scilit:
- Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectivesChemical Society Reviews, 2011
- Separator technologies for lithium-ion batteriesJournal of Solid State Electrochemistry, 2010
- A review of the features and analyses of the solid electrolyte interphase in Li-ion batteriesElectrochimica Acta, 2010
- Ceramic and polymeric solid electrolytes for lithium-ion batteriesJournal of Power Sources, 2010
- Novel composite polymer electrolyte for lithium air batteriesJournal of Power Sources, 2010
- Power sources for portable electronics and hybrid cars: lithium batteries and fuel cellsThe Chemical Record, 2005
- Design of electrolyte solutions for Li and Li-ion batteries: a reviewElectrochimica Acta, 2004
- Surface modification of cycloolefinic copolymers for optimization of the adhesion to metalsSurface and Interface Analysis, 2004
- Electrochemical characteristics of two types of PEO-based composite electrolyte with functional SiO2Journal of Power Sources, 2003
- Phase Diagrams and Conductivity Characterization of Some PEO ‐ LiX ElectrolytesJournal of the Electrochemical Society, 1986