A Study on the Thermal Behaviour of Micron-Sized Aluminium Powder in Contact with Water
Preprint
- 13 May 2026
- preprint
- Published by MDPI AG in Preprints.org
Abstract
Aluminium powder, an energetic material, is prone to thermal runaway upon water exposure under local heat sources, yet the nonadiabatic mechanisms of micron sized accumulated aluminium powder under localized heating remain unclear. This study employs a proprietary characterization platform to investigate the effects of particle size, water content, and local heat source power on heat transfer in the dry state and on parameters including induction time, onset temperature, peak heat release rate, and reaction heat during the induction and main reaction phases. In the dry state, decreasing particle size enhances effective thermal conductivity and accelerates temperature rise, whereas elevated local heat source power exacerbates thermal inertia. Under local heating upon water exposure, reduced particle size significantly enhances reactivity; the reaction heat of 2 μm powder reaches 983 J/g, approximately fourfoldAs shown in Figure9 that of 106 μm powder. Water content exhibits nonmonotonic regulation, with onset temperature minimizing at 25% water content and 66.4 °C and reaction heat peaking at 33%. Paradoxically, elevated local heat source power suppresses reaction intensity, and reaction heat at 10 W is one sixth of that at 2.5 W, attributed to rapid product layer densification and the steam film barrier effect shifting the controlling mechanism from chemical to diffusion control. A coupled multifactorial predictive model incorporating the three factors was established with R2 of 0.92, providing data and guidance for aluminium powder storage hazard prevention.Keywords
All Related Versions
- Version 1, 2026-05-13, Preprints
- Published version: Processes, 14 (12), 2007.
This publication has 46 references indexed in Scilit:
- Thermal runaway behaviour induced by localised aluminium-water reaction at low temperatureChemical Engineering Journal, 2026
- Investigating the incubation time of the water splitting reaction between aluminum powder and waterChemical Papers, 2025
- Model analysis of mass transfer in liquid films in a Taylor flow reactor for gas-liquid-solid three-phase reactionsChemical Engineering and Processing - Process Intensification, 2025
- Investigation of temperature gradient effects and effective thermal inertia during adiabatic decomposition of substances with varying exothermic characteristicsCase Studies in Thermal Engineering, 2024
- Thermal analysis of suspended single droplet evaporation measurements with a coupled lumped parameter modelHeat and Mass Transfer, 2023
- Improved multi-time scale lumped thermoelectric coupling modeling and parameter dispersion evaluation of lithium-ion batteriesApplied Energy, 2022
- Two aspects of water in self-heating risk of aluminium powders: calorimetric studyJournal of Thermal Analysis and Calorimetry, 2022
- Tunable kinetics of nanoaluminum and microaluminum powders reacting with water to produce hydrogenInternational Journal of Energy Research, 2019
- An experimental study of coal dust ignition in wedge shaped hot plate configurationsCombustion and Flame, 2012
- Temperature oscillation calorimetry for the determination of the heat capacity in a small-scale reactorChemical Engineering Science, 2008