THE INFLUENCE OF COMPOSITION OF CNT (CARBON NANOTUBE) ON THE PHYSICAL PROPERTIES OF BIOPLASTIC MADE FROM CASSAVA STARCH
Authors:
Open Access
- 30 July 2019
- journal article
- Published by National Research and Innovation Agency in Jurnal Sains Materi Indonesia
- Vol. 20 (4) , 174-178
Abstract
Bioplastics are starch-based polymers that are easily degraded by microorganisms, so they can be used as an alternative to the use of conventional plastics. In this research, bioplastics made from cassava starch was made using glycerol as plasticizer and used MWCNTs (Multi-Wall CNTs) type CNT as reinforcement with variations in the composition of 0%, 1%, 2%, and 3%. Bioplastics are made with a dry method (dry blending) with stages of pre-mixing, mixing, hot press and cold press. Characteristics of bioplastic starch/CNT include tensile strength, biodegradation and morphological. The test results show that the addition of CNT composition affects the mechanical properties of bioplastics. The optimum value of tensile strength occurred in the addition of 2% CNT at 13.52 MPa. Biodegradable test results using the Aspergillus niger mushroom prove that bioplastic starch/CNT can be degraded well. The results of morphological characteristics in the form of SEM results showed that 3% bioplastic starch / CNT had cracks and resulted in decreased tensile strength. FTIR test results indicate the presence of a new functional group C≡C because of the addition of CNT.Keywords
This publication has 9 references indexed in Scilit:
- Fabrication and Characterization of Sweet Potato Starch-based Bioplastics Plasticized with GlycerolJournal of Biological Sciences, 2018
- BIOPLASTIK PATI UMBI TALAS MELALUI PROSES MELT INTERCALATIONJurnal Distilasi, 2018
- Characterization of starch-based bioplastics from jackfruit seed plasticized with glycerolJournal of Food Science and Technology, 2017
- The stucture of bioplastic from cassava starch with nanoclay reinforcementAIP Conference Proceedings, 2016
- Effect of Amide Functionalization and Precuring on Tensile Properties of MWCNT/Epoxy NanocompositesMacromolecular Symposia, 2015
- A new way of quantifying the production of poly(hydroxyalkanoate)s using FTIRJournal of Chemical Technology & Biotechnology, 2015
- Plastic waste inputs from land into the oceanScience, 2015
- A theory of plasticity for carbon nanotube reinforced compositesInternational Journal of Plasticity, 2011
- Improving the flexural and thermomechanical properties of amino-functionalized carbon nanotube/epoxy composites by using a pre-curing treatmentComposites Science and Technology, 2011