Rheological and mechanical properties of wood flour filled polyisoprene/chlorosulphonated polyethylene rubber blends
Open Access
- 1 January 2007
- journal article
- Published by National Library of Serbia in Chemical Industry and Chemical Engineering Quarterly
- Vol. 13 (4) , 186-191
Abstract
The effect of wood flour (WF) on curing behavior and swelling properties of polyisoprene rubber/chlorosulphonated polyethylene (NR/CSM) rubber blends was investigated. The mechanical properties, as well as the equilibrium swelling characteristics of the elastomeric composites filled with WF (particle size from 300 to 400 ?m) were measured as a function of filler loading (the range of 0 to 50 phr) and compared with the values for the elastomeres based on commercial grade carbon black filler (nano-sized particles, 26-30 nm). In some formulations phenol-formaldehyde (PF) resins are used to achieve better adhesion between rubber macromolecules and filler particles. For WF filled elastomeres the maximum tensile strength of 11 MPa at 20 phr was recorded. Hardness of samples filled with WF increased with filler loading. Abrasion resistance decreases marginally with increasing filler loading. The equilibrium sorption in toluene of NR/CSM vulcanizates filled decreased with increasing filler loading for both type of filler.Keywords
This publication has 4 references indexed in Scilit:
- Rubber–filler interactions and rheological properties in filled compoundsProgress in Polymer Science, 2002
- An investigation on the potential of rice husk ash as fillers for epoxidized natural rubber (ENR)European Polymer Journal, 1995
- Diffusion of polymer molecules into polymer networks: Effect of stresses and contraintsJournal of Polymer Science Part B: Polymer Physics, 1991
- Cure characteristics and mechanical properties of carbon black filled styrene-butadiene rubber and epoxidized natural rubber blendsEuropean Polymer Journal, 1989