Optimization of the cationizing condition in salt‐free reactive dyeing of cotton fabric with the pad‐irradiate‐pad‐steam process using response surface methodology
Authors:
- 6 August 2019
- journal article
- research article
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 39 (3) , e13341
Abstract
Response surface methodology is widely used in the optimization of dyeing conditions. Herein, the color strength and dye fixation rate of the cotton fabric dyed by pad‐irradiate‐pad‐steam (PIPS) process were determined and compared to by conventional pad‐dry‐pad‐steam (PDPS) process. Then the response surface methodology and central composite design were used to optimize the cationizing conditions during the pad‐irradiation step of the process to obtain high color strength during the subsequent salt‐free reactive dyeing of the cotton fabric via a pad‐steam process. The obtained experimental data were fitted to the second‐order polynomial equation, and response surface plots and contour plots were used to identify the optimal cationizing condition, the 3‐chloro−2‐hydroxypropyltrimethylammonium chloride concentration of 104 g/L, the microwave irradiation power of 537 W, the treatment time of 6 min, and the molar ratio of sodium hydroxide to 3‐chloro‐2‐hydroxypropyltrimethylammonium chloride of 1.02. The results showed that the experimental color strength of the cotton fabrics was in close agreement with the value predicted by the model and the optimal cationizing condition was obtained precisely.Keywords
This publication has 35 references indexed in Scilit:
- Various nano-silica particles affecting dyeability of poly(ethylene terephthalate)/silica nanocomposite filmsFibers and Polymers, 2013
- A promising route to dye cotton by indigo with an ecological exhaustion process: A dyeing process optimization based on a response surface methodologyIndustrial Crops and Products, 2013
- An efficient transformation of cellulose into cellulose carbamates assisted by microwave irradiationCellulose, 2010
- HBP-NH2 grafted cotton fiber: Preparation and salt-free dyeing propertiesCarbohydrate Polymers, 2008
- Optimization of Lycopene Extraction from Tomato Cell Suspension Culture by Response Surface MethodologyJournal of Agricultural and Food Chemistry, 2008
- The Effect of Microwave Drying on Warp SizingTextile Research Journal, 2008
- Development of a one‐stage process for pretreatment and cationisation of cotton fabricColoration Technology, 2006
- Pretreatment of cotton with poly(vinylamine chloride) for salt‐free dyeing with reactive dyesColoration Technology, 2005
- Printing Cationized Cotton with Direct DyesTextile Research Journal, 2004
- Improving the environmental and economic aspects of cotton dyeing using a cationised cotton†Coloration Technology, 2001