Microstructural Characteristics and Tribological Behavior of HVOF-Sprayed Novel Fe-Based Alloy Coatings
Open Access
Abstract
Thermally-sprayed Fe-based coatings have shown their potential for use in wear applications due to their good tribological properties. In addition, these kinds of coatings have other advantages, e.g., cost efficiency and positive environmental aspects. In this study, the microstructural details and tribological performances of Fe-based coatings (Fe-Cr-Ni-B-C and Fe-Cr-Ni-B-Mo-C) manufactured by High Velocity Oxygen Fuel (HVOF) thermal spray process are evaluated. Traditional Ni-based (Ni-Cr-Fe-Si-B-C) and hard-metal (WC-CoCr) coatings were chosen as references. Microstructural investigation (field-emission scanning electron microscope FESEM and X-Ray diffractometry XRD) reveals a high density and low oxide content for HVOF Fe-based coatings. Particle melting and rapid solidification resulted in a metastable austenitic phase with precipitates of mixed carbides and borides of chromium and iron which lead to remarkably high nanohardness. Tribological performances were evaluated by means of the ball on-disk dry sliding wear test, the rubber-wheel dry particle abrasion test, and the cavitation erosion wear test. A higher wear resistance validates Fe-based coatings as a future alternative to the more expensive and less environmentally friendly Ni-based alloys.Keywords
This publication has 34 references indexed in Scilit:
- Surface properties of Mo-implanted PVD TiN coatings using MEVVA sourceApplied Surface Science, 2013
- Micromechanical properties and sliding wear behaviour of HVOF-sprayed Fe-based alloy coatingsWear, 2012
- Microstructural evolution and tribological behavior of Mo–Cu–N coatings as a function of Cu contentMaterials Chemistry and Physics, 2011
- Study of structure and corrosion resistance of Fe-based amorphous coatings prepared by HVAF and HVOFCorrosion Science, 2011
- Microstructure evolution and thermal stability of an Fe-based amorphous alloy powder and thermally sprayed coatingsJournal of Alloys and Compounds, 2009
- Phase dependence of Fe-based bulk metallic glasses on properties of thermal spray coatingsJournal of Alloys and Compounds, 2009
- Hardmetals as thermal spray coatingsPowder Metallurgy, 2007
- Cavitation erosion characteristics of a Fe–Cr–Si–B–Mn coating fabricated by high velocity oxy-fuel (HVOF) thermal sprayMaterials Letters, 2007
- Structure of amorphous iron-based coatings processed by HVOF and APS thermally sprayingMaterials Chemistry and Physics, 2004
- Wear engineering oxides/anti-wear oxidesWear, 1998