Nanoscale characterization of the dielectric charging phenomenon in PECVD silicon nitride thin films with various interfacial structures based on Kelvin probe force microscopy
Authors:
- 28 March 2011
- journal article
- research article
- Published by IOP Publishing in Nanotechnology
- Vol. 22 (20) , 205708
Abstract
This work presents a novel characterization methodology for the dielectric charging phenomenon in electrostatically driven MEMS devices using Kelvin probe force microscopy (KPFM). It has been used to study plasma-enhanced chemical vapor deposition (PECVD) silicon nitride thin films in view of application in electrostatic capacitive RF MEMS switches. The proposed technique takes the advantage of the atomic force microscope (AFM) tip to simulate charge injection through asperities, and then the induced surface potential is measured. The impact of bias amplitude, bias polarity, and bias duration employed during charge injection has been explored. The influence of various parameters on the charging/discharging processes has been investigated: dielectric film thickness, SiNx material deposition conditions, and under layers. Fourier transform infrared spectroscopy (FT-IR) and x-ray photoelectron spectroscopy (XPS) material characterization techniques have been used to determine the chemical bonds and compositions, respectively, of the SiNx films being investigated. The required samples for this technique consist only of thin dielectric films deposited over planar substrates, and no photolithography steps are required. Therefore, the proposed methodology provides a low cost and quite fast solution compared to other available characterization techniques of actual MEMS switches. Finally, the comparison between the KPFM results and the discharge current transients (DCT) measurements shows a quite good agreement.Keywords
This publication has 42 references indexed in Scilit:
- Effect of deposition conditions on charging processes in SiNx: Application to RF-MEMS capacitive switchesMicroelectronic Engineering, 2009
- Effect of substrate charging on the reliability of capacitive RF MEMS switchesSensors and Actuators A: Physical, 2008
- Adhesion and Friction Studies of Silicon and Hydrophobic and Low Friction Films and Investigation of Scale EffectsJournal of Tribology, 2004
- A comprehensive model to predict the charging and reliability of capacitive RF MEMS switchesJournal of Micromechanics and Microengineering, 2004
- Phenomenological theory to model leakage currents in metal–insulator–metal capacitor systemsPhysica Status Solidi (b), 2003
- Adhesion and friction studies of microelectromechanical systems/nanoelectromechanical systems materials using a novel microtriboapparatusJournal of Vacuum Science & Technology A, 2003
- RF MEMS switches and switch circuitsIEEE Microwave Magazine, 2001
- RF MEMS from a device perspectiveJournal of Micromechanics and Microengineering, 2000
- Stretched exponential relaxation in molecular and electronic glassesReports on Progress in Physics, 1996
- Poole-Frenkel Effect and Schottky Effect in Metal-Insulator-Metal SystemsPhysical Review B, 1967