A Robust Computing-in-Memory Macro With 2T1R1C Cells and Reused Capacitors for Successive-Approximation ADC
- 26 February 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (6) , 1693-1704
Abstract
Computing-in-memory (CIM) has emerged as a practical paradigm to bypass the von Neumann bottleneck. However, traditional CIM schemes face challenges due to the nonideal characteristics of nonvolatile memory (NVM). To address this issue, this work provides a resistive random access memory (RRAM)-based CIM macro employing two-transistor–one-RRAM–one-capacitor (2T1R1C) cells, with capacitors reused for the successive-approximation analog-to-digital converter (SAR ADC). Single-level RRAM is utilized to mitigate resistance variation. The multiply–accumulate (MAC) operation is performed via the charge and discharge of capacitors, enhancing robustness across different process, voltage, and temperature (PVT) corners. The capacitors in 2T1R1C cells are repurposed as sampling capacitors to integrate the ADC with the array. A precision-adjustable SAR (PA-SAR) logic is proposed to generate partial sums at varying precision levels aligned with different input bits, optimizing energy efficiency while maintaining reliability. Our proposed 2T1R1C array features an average area of 3.403 μm2 for each cell, which accounts for 87.46% of the total macro area. The total macro area is 1.020 mm2 with a capacity of 256 Kb, achieving an energy density of 0.201 TOPS/mm2. The PA-SAR logic boosts energy efficiency to 44.71 TOPS/W, marking a 38.55% improvement over conventional full-precision schemes.Keywords
Funding Information
- National Natural Science Foundation of China (62274142, M-0499)
This publication has 48 references indexed in Scilit:
- Compute in‐Memory with Non‐Volatile Elements for Neural Networks: A Review from a Co‐Design PerspectiveAdvanced Materials, 2023
- C-RRAM: A Fully Input Parallel Charge-Domain RRAM-based Computing-in-Memory Design with High Tolerance for RRAM Variations2022
- A 177 TOPS/W, Capacitor-based In-Memory Computing SRAM Macro with Stepwise-Charging/Discharging DACs and Sparsity-Optimized Bitcells for 4-Bit Deep Convolutional Neural Networks2022
- 16.1 A 22nm 4Mb 8b-Precision ReRAM Computing-in-Memory Macro with 11.91 to 195.7TOPS/W for Tiny AI Edge Devices2021
- 29.1 A 40nm 64Kb 56.67TOPS/W Read-Disturb-Tolerant Compute-in-Memory/Digital RRAM Macro with Active-Feedback-Based Read and In-Situ Write Verification2021
- Memory devices and applications for in-memory computingNature Nanotechnology, 2020
- Memristive crossbar arrays for brain-inspired computingNature Materials, 2019
- Neuromorphic Computing with Memristor CrossbarPhysica Status Solidi (a), 2018
- Deep Residual Learning for Image Recognition2016
- Gradient-based learning applied to document recognitionProceedings of the IEEE, 1998