Critical Experiments, Measurements, and Analyses to Establish a Crack Arrest Methodology for Nuclear Pressure Vessel Steels: Progress Report, January-June 1979
Authors:
- UsdoeUSUsdoe
- UsnrcUSUsnrc
- Oh (United States) Battelle Columbus Labs.OLOh (United States) Battelle Columbus Labs.
Open Access
- 1 September 1979
- report
- Published by Office of Scientific and Technical Information (OSTI)
Abstract
Progress in developing methods of measuring crack arrest toughness is described. In particular, a procedure for in-hot-cell experimentation has been developed. This procedure provides for controlled cyclic loading so that the crack can be initiated at or below a predetermined upper limit stress intensity. Crack arrest toughness of an irradiated high-Cu weldment was measured using this technique. Based on these experiments the temperature shift due to irradiation appears to be no greater than anticipated from NRC Reg. Guide 1.99. The same weldment was tested in the unirradiated condition and was found to have the same crack arrest toughness as base plate, when normalized to temperature relative to NDT. This is in contrast to a previous weldment which was significantly more brittle than base plate.Keywords
Funding Information
- USDOE (AT(49-24)-0293)
- USNRC (NRC-FIN-A4046)