Characteristic parameters for stress distribution along the intersection of tubular Y, T, X and DT joints
Authors:
- 1 April 2001
- journal article
- research article
- Published by SAGE Publications in The Journal of Strain Analysis for Engineering Design
- Vol. 36 (3) , 323-339
Abstract
Analysis of large-scale fatigue testing results has shown that the fatigue strength of offshore welded tubular joints is not dependent on the hot spot stress alone but is also significantly influenced by stress distributions around the intersection which are normally represented by several characteristic parameters. The through-thickness distribution for example is characterized by degree of bending. In order to represent the stress distribution along the intersection, the average stress concentration factor (SCF) concept was suggested and used in empirical stress intennsity factor (SIF) models. However, this parameter alone is not enough to characterize the stress distribution along the intersection. Furthermore, there is no parametric equation available to predict this parameter. For this reason, a new concept, stress distribution concentration factor (SDCF), has been proposed in this study to describe the spread of stress distribution along the intersection. Systematic thin shell finite element analyses have been conducted for 330 different tubular Y, T and 330 X and DT joints, typical of those used in offshore structures, subjected to different modes of loading. On the basis of these results, a set of parametric equations has been derived for the average SCF and SDCF as a function of non-dimensional joint geometric ratios a, β, γ, τ and ϑ for each mode of loading and for both the chord and brace sides of the intersection of tubular welded Y, T, X and DT joints.Keywords
This publication has 7 references indexed in Scilit:
- Parametric equations to predict stress distributions along the intersection of tubular X and DT-jointsInternational Journal of Fatigue, 1999
- Prediction of stress distributions along the intersection of tubular Y and T-jointsInternational Journal of Fatigue, 1999
- Prediction of degree of bending in tubular X and DT jointsInternational Journal of Fatigue, 1999
- Stress concentration factor parametric equations for tubular X and DT jointsInternational Journal of Fatigue, 1996
- Prediction of the stress distribution in tubular Y- and T-jointsInternational Journal of Fatigue, 1990
- A parametric study of the ratio of bending to membrane stress in tubular Y- and T-jointsInternational Journal of Fatigue, 1990
- Fatigue Fracture Mechanics Analysis of T and Y Joints1982