Combined Effect of Gas Blow Induction Heating Nitriding and Post-Treatment with Fine Particle Peening on Surface Properties and Wear Resistance of Titanium Alloy
- 1 October 2021
- journal article
- research article
- Published by Japan Institute of Metals in MATERIALS TRANSACTIONS
- Vol. 62 (10) , 1502-1509
Abstract
In order to fabricate a titanium alloy with superior wear resistance and fatigue strength, fine particle peening (FPP) was introduced as a post-treatment after gas blow induction heating (GBIH) nitriding. The surface characteristics of the treated alloy were examined using X-ray diffraction, scanning electron microscopy, laser microscopy and a micro-Vickers hardness tester. GBIH nitriding and post-treatment with FPP formed nitrided layers with high hardness and compressive residual stress at the surface of the alloy within a short period of time. This is due to the diffusion of nitrogen atoms during GBIH nitriding and plastic deformation of the surface layer during FPP. Reciprocating ball-on-disk wear tests were performed to investigate the wear resistance of the surface-treated alloy. The wear resistance of the titanium alloy was improved by the proposed surface treatment compared with samples that were only polished or FPP-treated. This is due to the presence of a nitrogen compound layer with high hardness at the surface. The abrasiveness toward the wear test counter material was also decreased by the combined surface treatment.Keywords
This publication has 34 references indexed in Scilit:
- Properties of nitrided layers formed during plasma nitriding of commercially pure Ti and Ti–6Al–4V alloySurface and Coatings Technology, 2012
- Fatigue properties of gas nitrided austenitic stainless steel pre-treated with fine particle peeningInternational Journal of Fatigue, 2010
- Several plasma diffusion processes for improving wear properties of Ti6Al4V alloyWear, 2009
- Effects of combined plasma-carburizing and shot-peening on fatigue and wear properties of Ti–6Al–4V alloySurface and Coatings Technology, 2009
- Evaluation of surface-modified Ti–6Al–4V alloy by combination of plasma-carburizing and deep-rollingMaterials Science and Engineering: A, 2008
- Effect of Fine Particle Peening Treatment prior to Nitriding on Fatigue Properties of AISI 4135 SteelJournal of Solid Mechanics and Materials Engineering, 2008
- Microstructural Change Induced by Fine Particle Peening and Its Effect on Elemental DiffusionJournal of Solid Mechanics and Materials Engineering, 2008
- Structural and tribological properties of the plasma nitrided Ti-alloy biomaterials: Influence of the treatment temperatureSurface and Coatings Technology, 2007
- Titanium alloys after surface gas nitridingSurface and Coatings Technology, 2006
- Hybrid Surface Modification of SCM 415 Material by Vacuum Carburizing and Fine Particle Peening.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 2000