DSP‐based resolver‐to‐digital conversion system designed in time domain
Authors:
Open Access
- 1 September 2014
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 7 (9) , 2227-2232
Abstract
Resolver is an absolute angle measurement and is mounted on the motor shaft to acquire the motor's absolute angular position. This study presents an equivalent circuit of the resolver neglected rotational back electromotive force. The transfer function of the resolver is derived from the equivalent circuit. The frequency response of the resolver is measured by a dynamic signal analyser to obtain the adequate frequency of resolver's reference signal. Furthermore, a digital signal processor (DSP)‐based resolver‐to‐digital conversion system is designed in time domain. A pulse signal generated by the DSP is utilised as a reference signal coupled into the resolver's rotor winding and provides primary excitation. The sine and cosine modulated output signals are sampled by the analogue‐to‐digital converter of the DSP within 1 μs. The sampled frequency of outputs signals are the same frequency as the pulse signal. The angular position is derived by the inverse tangent of the quotient of the demodulated sine and cosine samples. Test results are presented to validate the performances of the proposed scheme.Keywords
This publication has 11 references indexed in Scilit:
- DSP based all-digital resolver-to-digital conversion using DSRF-PLL2012
- Software-Based Resolver-to-Digital Converter for DSP-Based Drives Using an Improved Angle-Tracking ObserverIEEE Transactions on Instrumentation and Measurement, 2012
- High-Accuracy All-Digital Resolver-to-Digital ConversionIEEE Transactions on Industrial Electronics, 2011
- Experimental Verification of the Active Front-End Converters Dynamic Model and Control DesignsIEEE Transactions on Power Electronics, 2010
- Compensation of Amplitude Imbalance and Imperfect Quadrature in Resolver Signals for PMSM DrivesIEEE Transactions on Industry Applications, 2010
- Resolver Models for ManufacturingIEEE Transactions on Industrial Electronics, 2010
- Fully Integrated FPGA-Based Controller for Synchronous Motor DriveIEEE Transactions on Industrial Electronics, 2009
- A Resolver Angle Estimator Based on Its Excitation SignalIEEE Transactions on Industrial Electronics, 2008
- Software-Based Resolver-to-Digital Conversion Using a DSPIEEE Transactions on Industrial Electronics, 2008
- Position Measurement in Industrial Drives by Means of Low-Cost Resolver-to-Digital ConverterIEEE Transactions on Instrumentation and Measurement, 2007